نتایج جستجو برای: loading rate

تعداد نتایج: 1026616  

Journal: :علوم و تکنولوژی پلیمر 0
محمود مهرداد شکریه مجید جمال امیدی

fiber reinforced composites are widely used instead of traditional materials in various technological applications. therefore, by considering the extensive applications of these materials, a proper knowledge of their impact behavior (from low- to high-velocity) as well as their static behavior is necessary. in order to study the effects of strain rates on the behavior of these materials, specia...

Journal: :international journal of environmental research 0
m. ince department of environmental engineering, gebze institute of technology, gebze, turkey, 41400 e. senturk department of environmental engineering, gebze institute of technology, gebze, turkey, 41400 g. onkal engin department of environmental engineering, yildiz technical university, esenler, istanbul, turkey, 34220 b. keskinler department of environmental engineering, gebze institute of technology, gebze, turkey, 41400

since treatment of landfill leachate is quite complicated, there is a need to develop a system thatis capable of providing high treatment efficiencies. in this study, the treatment performance of a jet - loopmembrane bioreactor (jlmb) operated at different organic loading rates was investigated by observing thechanges in chemical oxygen demand (cod), total kjehldahl nitrogen (tkn) and total amm...

Journal: :journal of agricultural science and technology 2011
h. maghsoudi m. h. khoshtaghaza s. minaei h. zaki dizaji

mechanical properties of non-split pistachio nuts are among the lada required for the design of equipment needed for processing of the nut. unsplit pistachio nut samples were uniaxially loaded to determine the nut’s needed splitting force and energy, as well as poisson’s ratio and young’s modulus of elasticity. the tests were carried out at four moisture contents (5, 10, 15 and 20% wb), under f...

Journal: :international journal of environmental research 0
e. senturk department of environmental engineering, gebze institute of technology, gebze, 41400, kocaeli, turkey m. ýnce department of environmental engineering, gebze institute of technology, gebze, 41400, kocaeli, turkey g. onkal engin department of environmental engineering, gebze institute of technology, gebze, 41400, kocaeli, turkey

a thermophilic anaerobic contact reactor for the treatment of potato-processing wastewaterswas designed as a continuous-flow, completely-mixed homogeneous system. the reactor was operated at ten different organic loading rates ranging from 0.84 g cod/l·d to 7.00 g cod/l·d for a duration of approximately 250 days. the fundamental way to maintain optimum operating conditions of anaerobic digestio...

Journal: :international journal of environmental research 2013
e. senturk m. ýnce g. onkal engin

a thermophilic anaerobic contact reactor for the treatment of potato-processing wastewaterswas designed as a continuous-flow, completely-mixed homogeneous system. the reactor was operated at ten different organic loading rates ranging from 0.84 g cod/l·d to 7.00 g cod/l·d for a duration of approximately 250 days. the fundamental way to maintain optimum operating conditions of anaerobic digestio...

Journal: :international journal of environmental research 2013
m. ince e. senturk g. onkal engin b. keskinler

since treatment of landfill leachate is quite complicated, there is a need to develop a system thatis capable of providing high treatment efficiencies. in this study, the treatment performance of a jet - loopmembrane bioreactor (jlmb) operated at different organic loading rates was investigated by observing thechanges in chemical oxygen demand (cod), total kjehldahl nitrogen (tkn) and total amm...

2012
W. Wu J. C. Li J. Zhao

List of Symbols ej Measured strain wave at the position of the gauge j (j = a, b) e; e Positive and negative strain waves, respectively epj ; e n j Positive and negative strain waves at the position of the gauge j (j = a, b), respectively ei; er; et Incident, reflected and transmitted strain waves, respectively e ; epþ Positive strain waves at the front and back sides of rock joints, respective...

ژورنال: مواد پرانرژی 2014
زمانی, جمال , مبین, محمود, مظفری, علی,

The plastic behavior of materials depends on their strain rate sensitivity. The main objective of this paper is the analysis of the effect of strain rate sensitivity on plastic behavior of cylindrical shells under internal pressure loading and hence a large number empirical tests have been conducted on aluminum cylindrical shells. We have also manufactured and used a hydrostatic test machine to...

نمودار تعداد نتایج جستجو در هر سال

با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید