نتایج جستجو برای: liquid phase deposited coating
تعداد نتایج: 837762 فیلتر نتایج به سال:
SIGMA PHASE FORMATION IN A HEAT TREATED NI-50CR COATING APPLIED BY HVOF PROCESS ON A STAINLESS STEEL
Abstract: Two different coating microstructures of Ni-50Cr alloy were obtained on a stainless steel substrate by changing combustion characteristics of a high velocity oxy-fuel (HVOF) process and the size distribution of feed powder during coating process. Use of the finer feed powder and leaner fuel in oxygen/fuel ratio (i.e. using a ratio much less than stoichiometric ratio) led to formati...
In this work, Poly(ethyleneterephthalate) (PET) substrate was treated using KOH solution and was modified using hybrid O-I coating containing PCL )polycaprolactone( as organic phase and TEOS )tetraethoxysilane( as inorganic phase. The coating was prepared through a sol-gel process and applied on the surface by dip coater. Then, electrically conducting polythiophene (PTh) nanoparticles were depo...
in this study, physical vapor deposition (pvd) ti-cr-n coatings were deposited at two different temperatures100 and 400ºc on hardened and tempered tool steel substrates. the influence of the applied deposition temperature on the physical and mechanical properties of coatings such as roughness, thickness, phase composition, hardness and young’s modulus were evaluated. phase compositions were stu...
We characterize the selective deposition of liquid microstructures on chemically heterogeneous surfaces by means of dip coating processes. The maximum deposited film thickness depends critically on the speed of withdrawal as well as the pattern size, geometry, and angular orientation. For vertically oriented hydrophilic strips, we derive a hydrodynamic scaling relation for the deposited film th...
thermal barrier coatings (tbcs) are used to provide thermal insulation to the hot section components of gas turbines in order to enhance the operating temperature and turbine efficiency. hot corrosion and thermal shocks are the main destructive factors in tbcs which comes as a result of oxygen and molten salt diffusion into the coating. in this thesis atmospheric plasma spraying was used to dep...
خوردگی یکی از عوامل تخریب سازه ها و قطعات فلزی و از نظر اقتصادی عامل هزینه بری است. یکی از روش های مهندسی مقابله با خوردگی، ایجاد پوشش هایی با مقاومت به خوردگی بالا بر سطح مورد نظر است. در این میان فلز روی به دلیل خواص الکتروشیمیایی آن در مقایسه با فولاد و نیز ویژگی محصولات خوردگی آن، برای این منظور اهمیت ویژه ای دارد. یکی از روش های پوشش دهی روی، پوشش دهی به روش نفوذ در حالت جامد است که دارای ...
Hollow glass waveguides (HGWs) are an attractive alternative to traditional solid-core and 2D photonic crystal, infrared transmissive fibers. Applications for HGWs at wavelengths longer than 2 microns include use of the guides for the delivery of laser power and for use as chemical and thermal sensors. To date, the most common HGW is one with an inner coating of Ag followed by a single-dielectr...
چکیده ندارد.
CHARACTERIZATION AND CORROSION OF BCC-TANTALUM COATING DEPOSITED ON ALUMINUM AND STEEL SUBSTRATE BY DC MAGNETRON SPUTTERING by Chirag Joshi Tantalum is one of the most versatile highly refractory corrosion-resistant metals. Tantalum coating can be used as an effective corrosion barrier if it is continuous, free from defects and it adheres well to the substrate. A DC magnetron sputtering techniq...
In this study, physical vapor deposition (PVD) Ti-Cr-N coatings were deposited at two different temperatures 100 and 400ºC on hardened and tempered tool steel substrates. The influence of the applied deposition temperature on the physical and mechanical properties of coatings such as roughness, thickness, phase composition, hardness and Young’s modulus were evaluated. Phase compositions were st...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید