Abstract   In vibratory systems, linear and nonlinear vibration absorbers can be used to suppress the primary and super-harmonic resonance responses. In this paper, the behavior of a nonlinear system with a nonlinear absorber, under the primary and super-harmonic resonances is investigated. The stiffnesses of the main system and the absorber are cubically nonlinear and the dampers are linear. M...

Recently, a large amount of studies have been related to nonlinear systems with multi-degrees of freedom as well as continuous systems. The purpose of this paper is to optimize passive vibration absorbers in linear and nonlinear states for an Euler-Bernoulli beam with a nonlinear vibratory behavior under concentrated moving load. The goal parameter in the optimization is maximum deflection of t...

recently, a large amount of studies have been related to nonlinear systems with multi-degrees of freedom as well as continuous systems. the purpose of this paper is to optimize passive vibration absorbers in linear and nonlinear states for an euler-bernoulli beam with a nonlinear vibratory behavior under concentrated moving load. the goal parameter in the optimization is maximum deflection of t...

In this work, a system consisting of a main structure with a nonlinear tuned vibration absorber having a hardening spring attached to it is considered. The nonlinearity in the absorber's spring is a cubic nonlinearity and is obtained by attaching two additional, relatively soft, similar linear springs to the absorber's mass. These added springs are attached to the absorber's mass in such a way ...

This paper analyzed the structure and principle of a regenerative electromagnetic shock absorber in detail. The innovative shock absorber resembles linear generator in principle and can generate electric power through the relative reciprocating motion between coil assembly and permanent magnet assembly. At the same time, the damping can remove discomfort caused by road roughness. The regenerate...

In this paper, a novel flexible tunable metasurface absorber is proposed for large-scale remote ethanol sensor applications. The proposed metasurface absorber consists of periodic split-ring-cross resonators (SRCRs) and microfluidic channels. The SRCR patterns are inkjet-printed on paper using silver nanoparticle inks. The microfluidic channels are laser-etched on polydimethylsiloxane (PDMS) ma...

In classic passive suspension design, comfort and road handling are conflicting design criteria. An active or semi-active suspension offers the possibility to vary the damper characteristics along with the road profile. Such systems have discrete settings or are limited in bandwidth up to 10Hz. This paper discusses the development of a controller for a passenger car using a recently developed a...

The nonlinear two-degree-of-freedom system under consideration consists of the linear oscillator with a relatively big mass, which is an approximation of some continuous elastic system, and of the vibro-impact oscillator with a relatively small mass, which is an absorber of the linear system vibrations. Analysis of nonlinear normal vibration modes shows that a stable localized vibration mode, w...

This paper dis cusses the development of a nonlinear shock absorber model for low-frequency CAE-NVH applications of body-on-frame vehicles. In CAE simulations, the shock absorber is represented by a linear damper model and is found to be inadequate in capturing the dynamics of shock absorbers. In particular, this model neither captures nonlinear behavior of shock absorbers nor distinguishes bet...

The Compact Linear Fresnel Reflector (CLFR) is a linear-concentrating solar thermal energy system currently in the prototype stage at the Liddell power station in the Hunter Valley, NSW. A system-level thermo-fluidic model for the CLFR has been developed in order to predict steady-state operating conditions, required pumping power and pressure, mass transfer around the system and likely startup...