designing and manufacturing the multiple jets simulator and experimental investigation of the multiple jets in crossflow at low velocity ratios have been studied together with design and build a low-speed wind tunnel. a specific rake is used to determine the flow field pressure and changes in static pressure measured by pressure taps in the near field of the jets. there are generally three regi...

Designing and manufacturing the multiple jets simulator and experimental investigation of the multiple jets in crossflow at low velocity ratios have been studied Together with design and build a low-speed wind tunnel. A specific rake is used to determine the flow field pressure and changes in static pressure measured by pressure taps in the near field of the jets. There are generally three regi...

Designing and manufacturing the multiple jets simulator and experimental investigation of the multiple jets in crossflow at low velocity ratios have been studied Together with design and build a low-speed wind tunnel. A specific rake is used to determine the flow field pressure and changes in static pressure measured by pressure taps in the near field of the jets. There are generally three regi...

in this study, the effect of suction and the parameters such as suction amplitude, suction coefficient and suction jet length on naca0012 was evaluated. the turbulence employed model was the rsm model. suction jet is located in 10% of the chord length. the range of suction jet entrance velocity was selected from 0.1 to 0.5 of freestream velocity. the maximum increase in lift to drag ratio was s...

An axisymmetric jet issued from a sharp edged circular convergent nozzle has been studied experimentally in the near field at Reynolds number 5.3x104  to search the saddle shape behavior of mean velocity and the role of mean static pressure in the jet flow. Due to the vena contracta effect the centerline mean velocity of the jet increases about 4.2% of its exit value and corresponding decrease ...

In the present work, a numerical simulation of two parallel turbulent jets was performed. The simulations were carried out by using the  standard, the  standard and the RSM models. A parametric study was also presented to determine the effect of the nozzles spacing and velocity ratio on the axial and transverse positions of the merge and combined points. Correlations between the various paramet...

numerous investigations have been devoted towards understanding the hydrodynamics of gas jets in fluidized beds. however, most of them address the problem from  macroscopic point of view, which does not reveal the true behavior in the jet region at the single particle level. the present work aims to understand the jet behavior from a more fundamental level, i.e. the individual particle level. a...

background: the vascular response to recurrent tissue hypoxia and reperfusion following red blood cell sickling causes acute chest syndrome and chronic lung disease. the purpose of this study was to determine the pattern of chronic lung lesions and possible risk factors in sickle cell patients in lagos, nigeria.methods: from july 2012 to april 2013, pulmonary function test (pft) and chest-x-ray...

This research aims to study jet downstream scour model under the influence of changes of water level. It also studies and analyzes different parameters and components of diffusion of submerged jet flow in an acceptor fluid and scour hole dimensions. To achieve the objectives, a physical model was made in proportion to the research title. With the Froude number increasing in a nozzle discharge, ...

The study of interactions of jet into cross flow at different longitudinal and transverse angles of jet was studied. The following components were designed and constructed: a low velocity wind tunnel to produce the uniform flow, a flat plate with a traverse injection system to simulate the jet injection, and a spatial rake to measure the total pressure. The tests were carried out at longitudina...