1. Ground Granulated Blast Furnace Slag Ground Granulated Blast Furnace Slag (GGBFS) is a by product of the steel industry. Blast furnace slag is defined as “the non-metallic product consisting essentially of calcium silicates and other bases that is developed in a molten condition simultaneously with iron in a blast furnace.” [1] In the production of iron, blast furnaces are loaded with iron o...

This paper focuses on research concerning the ecotoxicological properties of granulated slag from the pilot production of gray iron with red mud addition and concrete composites with the application of this slag. Red mud is a hazardous waste generated in the production of aluminium oxide. Negative ecotoxicological tests are, therefore, one of the basic prerequisites for the ability to use granu...

Copper smelter slag and copper smelter slag flotation tailings were leached using sulphuric acid solutions, without or with the addition of either ferric sulphate or hydrogen peroxide. Copper extraction from the slag was typically found to be twice as high as that from the slag flotation tailings. Hydrogen peroxide was determined to be the best lixiviant. Thus, copper and iron extractions were ...

Alumina-rich iron ore is a widely existed polymetallic deposit in the nature, and it has a high comprehensive utilization value. Because the alumina and iron contents of alumina-rich iron ore vary from each other, there are many different measures and processes to recover iron and alumina from the various kinds of alumina-rich iron ore. In the blast furnace (BF) ironmaking process, the alumina ...

smelting of hammerable iron and its treatment in antiquity and Medieval produced also by-product: slag. Because of small yields of iron the process produced only small amounts of slag that did not attract attention of smelters concerning its possible use. the use of slag pieces was only accidental. a lot of slag pieces and blocks from slag pit shaft furnaces were used as a material for mound bu...

Current blast furnace technology is a two-stage ironmaking process that requires that iron ore concentrate first be formed into pellets, fired at 1260°C, cooled, transported to the blast furnace, and then re-heated to approximately 1500°C to produce pig iron. This heating, cooling, and then reheating wastes a great deal of energy, which would be saved if the ironmaking process had only a single...

The effect of pig iron slag particles on soil physico-chemical, biological and certain soil enzyme properties was studied. Contamination of iron slag particles altered physico-chemical, biological and enzyme properties of soil. While soil pH increased slightly, electrical conductivity, carbon, potassium and phosphorus contents increased significantly in polluted soil. Contamination of soil with...

(Received: November 27, 2010; Accepted: February 9, 2011) Abstract: The effect of pig iron slag particles on soil physico-chemical, biological and certain soil enzyme properties was studied. Contamination of iron slag particles altered physico-chemical, biological and enzyme properties of soil. While soil pH increased slightly, electrical conductivity, carbon, potassium and phosphorus contents ...

The present paper introduces the steel production and BOF slag processing techniques in Steelmaking Sector of Bayuquan Iron and Steel Subsidiary, Ansteel. The technology of slag tailings utilization has been developed under the consideration of the properties of slag tailing and the characteristics of slag forming in BOF steelmaking operation practice. The processing of the BOF slag includes ho...

The most important component of steelmaking slags is the iron oxide since it serves as the oxidizing agent in refining reactions. The measurement of the iron oxide content is performed in the steelworks by taking a sample out of the liquid slag, cooling it and subsequently analysing it. The procedure takes some time. It would be highly desirable, therefore, to develop methods for rapid in situ ...