the application of neural networks to model a laboratory scale inverse fluidized bed reactor has been studied. a radial basis function neural network has been successfully employed for the modeling of the inverse fluidized bed reactor. in the proposed model, the trained neural network represents the kinetics of biological decomposition of organic matters in the reactor. the neural network has b...

a solid – liquid – gas, multiphase reactor, called inverse fluidized bed bioreactor (ifbbr) was used in this study for the treatment of starch industry wastewater of high organic content and acidic nature. mixed culture obtained from the sludge, taken from starch industry effluent treatment plant, was used as microorganisms. experiments were carried out in an inverse fluidized bed bioreacto...

A solid – liquid – gas, multiphase reactor, called Inverse Fluidized Bed Bioreactor (IFBBR) was used in this study for the treatment of starch industry wastewater of high organic content and acidic nature. Mixed culture obtained from the sludge, taken from starch industry effluent treatment plant, was used as microorganisms. Experiments were carried out in an Inverse fluidized bed bioreactor, a...

A solid – liquid – gas, multiphase reactor, called Inverse Fluidized Bed Bioreactor (IFBBR) was used in this study for the treatment of starch industry wastewater of high organic content and acidic nature. Mixed culture obtained from the sludge, taken from starch industry effluent treatment plant, was used as microorganisms. Experiments were carried out in an Inverse fluidized bed bioreactor, a...

Nanoparticles (NPs) are applied in a wide range of processes, and their use continues to increase. Fluidization is one of the best techniques available to disperse and process NPs. NPs cannot be fluidized individually; they fluidize as very porous agglomerates. The objective of this article is to review the developments in nanopowder fluidization. Often, it is needed to apply an assistance meth...

ISSN 2277 5056 | © 2012 Bonfring Abstract--Fluidization is an operation in which solid particles are kept under suspension supported by the upward flow of liquid/gas phase. In classic fluidization the solids density are higher than the liquid, where as in Inverse fluidization the solids density are lower than that of continuous liquid phase. The phase holdup measurements in three phase classic/...

Effects of rapid heat transfer using a fluidized bed on the heat-treating response of Al-Si-Mg alloys (both unmodified and Sr modified) were investigated. The heating rate in the fluidized bed is greater than in conventional air convective furnaces. Particle size analyses of eutectic Si showed that the high heating rate during fluidized bed solution heat treatment causes faster fragmentation an...

Introduction Understanding the jetting phenomena near the gas distributor plate in a fluidized bed is important to gassolids mixing, heat and mass transfer, and erosion on any bed internals, which can all affect the performance of the bed. Moreover, acoustic vibration in a fluidized bed can be used to enhance the fluidization quality of particulate matter. Visualizing the jetting structure usin...

several methods are used to decrease seed drying time and enhance the quality of dried seeds. influidization methods, good aeration occurs during the drying process. in this research, conditioned seedswith 20% d.b. moisture content were dried at 30°, 40°, 50° and 60°c using three bed conditions (fixed,minimum fluidized, fluidized). all experiments were done using a batch-type fluidized bed drye...

Spirals as internals are utilized to reduce the axial mixing of solids in fluidized beds, by routing the solids flow in a predetermined route or by localizing the solids mixing. The drying kinetics of continuous fluidized bed with and without internals has been compared and modeled using batch drying kinetics and residence time distribution analysis. The batch drying experiments were conducted ...