Determination of the local interlaminar stress distribution in a laminate with a bolt-filled hole is helpful for optimal bolted joint design, due to the three-dimensional (3D) nature of the stress field near the bolt hole. A new interlaminar stress distribution phenomenon induced by the bolt-head and clamp-up load, which occurs in a filled-hole composite laminate, is investigated. In order to e...

in the traditional hole drilling method the in-plane stresses are studied in detail and the interlaminar stresses are not taken seriously. the interlaminar stresses on the free edge of composite materials are important and can cause matrix cracking and delamination. inserting holes in composite laminates causes free edges and it can induce interlaminar shear and normal stresses. in this researc...

Interlaminar shear strength (ILSS) of fiber reinforced polymer composite is an important property for most of the structural applications. Matrix modification is an effective method used to improve the interlaminar shear strength of composite. In this paper, EPON 862/w epoxy system was modified using Tetraethyl orthosilicate (TEOS) electrospun nanofibers (ENFs) which were produced using electro...

Based on generalized laminate plate theory, the formulation of a one-dimensional beam finite element with layer-wise constant shear (BLCS) is presented. The linear layer-wise representation of in-plane displacements permit accurate computation of normal stresses and transverse shear stresses on each layer for laminated beams with dissimilar ply stiffnesses. The BLCS formulation is equivalent to...

Photoacoustic spectroscopy was used to predict the interlaminar shear strength of a carbon/epoxy composite. Samples were artificially aged by exposing the samples to elevated temperatures in an air environment. Short-beam shear tests were performed to determine mechanically the interlaminar shear strength of the samples. Photoacoustic spectra of the samples were also collected and compared to m...

A review is made on the di€erent methods used for the estimation of transverse/interlaminar stresses in laminated composite plates and shells. Both analytical and numerical methods are considered. In numerical methods while the emphasis is given on ®nite element methods, other methods like the ®nite di€erence method is also brie ̄y discussed. Aspects considered are: e€ects of variation in geomet...

The potential use of carbon fibre laminate composites is limited by the weak out-ofplane properties, especially delamination resistance. The effect of incorporating titanium carbide to the mesophase pitch matrix precursor of carbon fibre laminate composites on interlaminar shear strength is studied both on carbonised and graphitised composites. The presence of titanium carbide modifies the opti...

A complete database of the mechanical properties of an epoxy polymer reinforced with uni-weave carbon fibre non-crimp fabric (NCF) is established. In-plane and through-the-thickness tests were performed on unidirectional laminates under normal loading and shear loading. The response under cyclic shear loading was also measured. The material has been characterised in terms of stiffness, strength...

Interlaminar fracture mechanics has proven useful for characterizing the onset of delaminations in composites and has been used with limited success primarily to investigate onset in fracture toughness specimens and laboratory size coupon type specimens. Future acceptance of the methodology by industry and certification authorities however, requires the successful demonstration of the methodolo...

The use of composite materials offshore has increased over the last years. Long term performance of a component is an important consideration for users and authorities when evaluating a composite solution. Long term data of composites are widely available for many material combinations. Data in sea water environment are more difficult to find. However, most of the available long-term data is re...