In this paper, the effect of the Intake Valve Deactivation (IVDA) on engine performance is investigated in detail. Based on an optimization platform with Genetic Algorithm (GA) and engine thermodynamic model, the characteristics of the engine volumetric efficiency and pumping loss were studied under the cam-drive, Single Intake Valve (SIV) and Dual Intake Valves (DIV) operating modes, and the e...

This paper presents a failure analysis on a failed intake valve in a gasoline engine. During an endurance test, an intake valve was broken and caused some damages on the piston. Material examinations (by a light microscope and also a scanning electron microscope) were conducted on the fracture surface of the intake valve shaft. Results showed that no pores or defects could be observed and the m...

Small diesel engines are widely used for commercial vehicle and passenger car applications due to their higher torque requirements, fuel economy, and better thermal efficiency. These engines are exposed to different operating and environmental conditions and hence emissions from these engines are erratic. Strategies are required to enhance performance and reduce engine-out emissions considering...

A computational optimization was performed for a direct-injection diesel engine using three-dimensional modeling. Fully transient CFD analyses of different valve profile strategies for the intake and compression strokes were performed to evaluate the effects on both engine performance and in-cylinder flow-field evolution. The turbulence model was used along with the second order linear upwin...

In this study it has been tried, to compare results and convergence rate of sensitivity analysis and conjugate gradient algorithms to reduce fuel consumption and increasing engine performance by optimizing the timing of opening and closing valves in XU7/L3 engine. In this study, considering the strength and accuracy of simulation GT-POWER software in researches on the internal combustion engine...

a computational optimization was performed for a direct-injection diesel engine using three-dimensional modeling. fully transient cfd analyses of different valve profile strategies for the intake and compression strokes were performed to evaluate the effects on both engine performance and in-cylinder flow-field evolution. the turbulence model was used along with the second order linear upwind s...

in this study it has been tried, to compare results and convergence rate of sensitivity analysis and conjugate gradient algorithms to reduce fuel consumption and increasing engine performance by optimizing the timing of opening and closing valves in xu7/l3 engine. in this study, considering the strength and accuracy of simulation gt-power software in researches on the internal combustion engine...

Abstract Cylinder deactivation is well-known in spark-ignited (SI) engines and compression-ignited (CI) engines. The major reason why the efficiency of these decreased at part load due to flow restriction intake system caused by partially closing throttle valves, which causes increased pumping losses. In order resolve this issue, cylinder can be implemented SI with four cylinders developing a s...

Engines equipped with camless valve trains will have greater space for performance optimization. In this paper, based on the electromagnetic actuated valve train system, one-dimensional and three-dimensional simulation models on engine thermodynamic cycle and in-cylinder charge motion are established, respectively. With the application of early-intake-valve closing (EIVC) strategy，unthrottled l...