torsion of many symmetric structures, which were designed based on the seismic codes, is due to their asymmetricity induced during inelastic behavior. although the structure was designed symmetrically assuming elastic based criteria, different factors such as material inconsistency in structure, construction details discrepancy and construction errors may result in asymmetric behavior in inelas...

Torsion of many symmetric structures, which were designed based on the seismic codes, is due to their asymmetricity induced during inelastic behavior. Although the structure was designed symmetrically assuming elastic based criteria, different factors such as material inconsistency in structure, construction details discrepancy and construction errors may result in asymmetric behavior in inelas...

Results of an experimental investigation of the seismic performance of prefabricated column-footing connections are presented. Tests were conducted on six 1/4-scale prefabricated column specimens inserted into prefabricated footings in two Groups. Group-1 consisted of four specimens, which were tested under constant axial load and cyclic inelastic lateral displacements. The remaining two specim...

near-fault ground motions have caused very much damage in the vicinity of seismic sources during recent earthquakes. it is well known that under specific circumstances, intensive ground shakings near fault ruptures may be characterized by short-duration impulsive motions. this pulse-type motion is generally particular to the forward direction, where the fault rupture propagates towards the site...

when structures are subjected to strong ground motion excitations, structural elements may be prone to yielding, and consequently experience significant levels of inelastic behavior. the effects of inelastic behavior on the distribution of peak floor loads are not explicitly accounted for in current seismic code procedures. during recent years, many studies have been conducted to develop new de...

This paper describes a continuum model for analyzing the inelastic behavior of a single walled carbon nanotube (SWCNT) in different loading conditions. Because of limitations in using molecular dynamics (and other atomic methods) to model the failure load of the SWCNT, continuum mechanics methods are considered in this paper. Based on some experimental and theoretical results, an elasto-plastic...

Researches show that the strength criterion is inadequate for design of structures against seismic loads. Since structures yield and experience plastic deformation under strong ground motion, considering structural damage with inelastic behavior may be a considerable criterion for design and control of the structures.In this paper, three steel structures with dual system consisting of intermedi...

hysteretic dampers as the most practical passive control methods have improved the seismic performance of steel structures through energy dissipation induced by large inelastic deformations. among them in this paper, kbf (knee braced frames), a special form of braced frames having a diagonal brace connected to a knee element instead of beam-column joint, is investigated. in such systems, the kn...

Near-fault ground motions have caused very much damage in the vicinity of seismic sources during recent earthquakes. It is well known that under specific circumstances, intensive ground shakings near fault ruptures may be characterized by short-duration impulsive motions. This pulse-type motion is generally particular to the forward direction, where the fault rupture propagates towards the site...

the purpose of this study is to determine the effect of vierendeel panel width and vertical truss spacing ratio in an inelastic behavior of the stf system due to earthquake loads. the stf system is applied to a six-storey building that serves as apartments [2]. the stf system is used in the building in the transverse direction (n-s direction), while in the longitudinal direction (w-e direction)...