rutting in asphalt concrete is a very common form of distress in asphalt concrete pavement which unfortunately has been incurable to date. one of the prime reasons of rutting is attributed to the behaviour of asphalt binder at elevated temperature. this study has investigated the performance of polypropylene fibres modified asphalt concrete mix against rutting. two types of asphalt concrete sam...

in order to simultaneously improve wet and dry strengths of paper and decrease environmental issues related to the wet strength resins, in this study effect of application method of wet strength additives on paper properties was investigated. wet strength resins were applied in four methods including spraying an aqueous glyoxal solution on to the surface of wet paper, addition of aminated polya...

BACKGROUND Aim of the study was to verify the efficiency of Martens hardness measurements in detecting the degradation of composite resin cements during artificial aging. METHODS Four cements were used: Variolink II (VL2), RelyX Unicem 2 Automix (RUN), PermaFlo DC (PDC), and DuoCem (DCM). Specimens for Martens hardness measurements were light-cured and stored in water at 37 °C for 1 day to al...

BACKGROUND To evaluate a potential correlation between flexural strength and indirect tensile strength in assessing the mechanical strength of resin composite cements. METHODS Flexural strength (n = 5) and indirect tensile strength (n = 5) of 7 resin composite cements (RelyX Unicem 2 Automix [RXU], Panavia SA [PSA], Clearfil SA [CSA], Panavia F2.0 [PF2], Multilink Implant [MLI], DuoCem [DCM],...

PURPOSE To assess the effect of cyanoacrylate glue on knot slippage and strength in vitro. METHODS Ethibond 3/0 was tested using a tensile tester. A single drop of cyanoacrylate glue was applied to the knots. Seven knot configurations (10 samples each) were tested: (1) a surgeon's knot (S) plus 4 square throws (+4) without glue (control group), (2) S plus one square throw (+1) without glue, (...

BACKGROUND Resin composite cements are used in dentistry to bond ceramic restorations to the tooth structure. In the oral cavity these cements are subjected to aging induced by masticatory and thermal stresses. Thermal cycling between 5 and 55 °C simulates the effect of varying temperatures in vitro. Purpose of this study was to compare indirect tensile to compressive strength of different ceme...

the performance of asphaltic pavements during their service life is highly dependent on the mechanical properties of the asphaltic layers. therefore, in order to extend their service life, scientists and engineers are constantly trying to improve the mechanical properties of the asphaltic mixtures. one common method of improving the performance of asphaltic mixtures is using different types of ...

Cold-in-place recycling (CIR) is an environmentally sustainable alternative for preservation of asphalt pavements. A major disadvantage of this practice is the lower strength of the cold-in-place mixtures. Addition of cement into this type of mixture is a method for increasing its bearing capacity. The effect of cement content on the mechanical properties of the cold-in-place recycled asphalt m...