Flotation process in mechanical cells is carried out in highly turbulent conditions. In this work, the impact of impeller speed on four characteristics of the quiescent zone, i.e. zone height, turbulence, solid percentage, and gas holdup, and their relationship with the entrainment is investigated, and it is shown why at a higher impeller speed, entrainment is not significant. The height of the...

The effects and influences of various operational parameters on the efficiency of mixer-settlers are thoroughly studied in this paper. One of the most important factors in designing a mixer-settler is to obtain an optimum operational extraction and overall efficiency. These two factors are dependent on various parameters such as impeller shape, size and speed of impeller, baffle size, residence...

Experimental work was carried out to investigate the influence of impeller speed, granulation time, binder mass and their interactions on granule size distribution, mean size and binder content distribution in a conical high shear granulator. It was observed that the response of high shear granulation to changes in process parameters varies significantly from one operating condition to anot...

experimental work was carried out to investigate the influence of impeller speed, granulation time, binder mass and their interactions on granule size distribution, mean size and binder content distribution in a conical high shear granulator. it was observed that the response of high shear granulation to changes in process parameters varies significantly from one operating condition to another....

Engkabang Fat Esters are produced from the alcoholysis reaction of oleyl alcohol and its fat using enzyme as biocatalyst. The work has been previously carried out mainly on the optimization of Engkabang Fat esters production in organic solvents. However, the effect of impeller speed-substrate molar ratio has yet to be discussed in detail. In the present paper, the influences of impeller speed a...

As a key part of the power machine, unmanned aerial vehicle (UAV) impeller is widely used in aerospace field, and it plays a very important role in the national defense industry. Impeller in the work of higher speed, centrifugal force and aerodynamic force effect on the impeller at the same time, so that the impeller is easy to failure, a serious impact on the use of performance and life of the...

In this work, the effects of the types of frother (MIBC, pine oil, and A65) and operational parameters (impeller speed and air flow rate) on the flotation of quartz coarse particles was investigated using nano bubbles (NBs). Quartz particles of the size of -425+106 mm and three types of frother were used for the flotation experiments. Also the impeller speed was 600 to 1300 rpm, and the air flo...

Radiotracer experiments are carried out in order to determine the mean residence time (MRT) as well as percentage of dead zone, V dead (%), in an integrated mixer consisting of Rushton and pitched blade turbine (PBT). Conventionally, optimization was performed by varying one parameter and others were held constant (OFAT) which lead to enormous number of experiments. Thus, in this study, a 4-fac...

SUMMARY The aerodynamic design and experimental performance of a centrifugal compressor designed for a pressure ratio of 6.5 and a specific speed of 68 are described, The compressor consisted of a radially-vaned impeller and a transonic, vaned radial diffuser. At design speed a peak overall total-to-total isentropic efficiency of 0.746 was achieved at the maximum pressure ratio of 5.9, rising t...

The effect of impeller speed on the air flow in a selfaerated Denver laboratory flotation cell was investigated using computational modelling. Air is induced into the slurry by the impeller’s rotating action. The rate of air flow is determined by the suction pressure created by the impeller, the hydrostatic head of the slurry and the frictional losses along the delivery shaft from the inlet val...