نتایج جستجو برای: hydraulic jump length

تعداد نتایج: 352933  

Journal: :آب و خاک 0
تورج هنر سوده پورحمزه

abstract many studies have been conducted on the characteristics of hydraulic jump over gradually expanding cross sections, but comparatively few have been carried out on basins with convergent wall. in the present research, the hydraulic jump characteristic of the stilling basin with convergent wall has been investigated. the main objective of this research is evaluation of conjugate depths ra...

ژورنال: علوم آب و خاک 2018
خانخانی زوراب, رضا, کاشفی پور, محمود,

The purpose of this study was to evaluate two perforated sills in the stilling basin and their impact on characteristics of the hydraulic jump, such as the length of the roller of hydraulic jump, decrease in the secondary depth of the hydraulic jump, and the required tailwater depth. Also, the optimal distance of two perforated sills from the beginning of the stilling basin with a fixed height ...

ژورنال: علوم آب و خاک 2013
سید محمود کاشفی پور, , محمد توزنده جانی, ,

One of the usual ways to dissipate excess energy in the dam's downstream is hydraulic jump. Hydraulic jump is a rapidly varied flow, in which the flow conditions change from supercritical to sub-critical with a large amount of energy loss. In this research, a combination of two water jets in the form of overflow dam and underflow through a slot on the body of an ogee dam with the USBR standard ...

Journal: :آب و خاک 0
محسن نصرآبادی محمد حسین امید جواد فرهودی

abstract in this study, the effect of suspended load transport on the characteristics of submerged hydraulic jump (shj) in a rectangular channel was investigated experimentally. sediment concentration and jet froude numbers in the range of 0.424%-16.15% and 1.93-4.96, respectively, were considered. tow grain size 0.15 and 0.03 mm were used in the experiments. characteristics of submerged hydrau...

ژورنال: علوم آب و خاک 2022

In this study accuracy of the ANFIS and ANFIS-PSO models to estimate hydraulic jump characteristics including sequence depth ratio, the jump length, the roller length ratio, and relative energy loss was evaluated in stilling basin versus laboratory results. The mentioned characteristics were measured in the stilling basin with a rectangular cross-section with four different adverse slopes, four...

Journal: :تحقیقات آب و خاک ایران 0
امین قاسمی گروه مهندسی آبیاری و آبادانی دانشگاه تهران محمد حسین امید گروه مهندسی آبیاری و آبادانی دانشگاه تهران محسن نصرآبادی گروه مهندسی آبیاری و آبادانی دانشگاه تهران علی رئیسی استبرق گروه مهندسی آبیاری و آبادانی دانشگاه تهران

in this research, in order to develop new relationships with reasonable accuracy for estimation of the ‎submerged hydraulic jump characteristics, a study has been conducted experimentally. experiments have ‎been done in a rectangular channel with a length of 9 m, a width of 0.5 m and a depth of 0.45 m. froude ‎numbers in these tests range from 3.5 to 11.5 and between submergence ratios of 0.1 t...

Journal: :آب و خاک 0
رضا بدیع زادگان کاظم اسماعیلی محمود فغفور مغربی مجتبی صانعی

abstract one of the most frequently encountered cases of rapid varied flow is the hydraulic jump. it occurs when a supercritical open channel flow changes into sub critical flow. in the present research, the experimental study of the hydraulic jump on seven sinusoidal corrugated beds with different wave steepness. the wave steepness of sinusoidal corrugated beds is in the range of 0.1667 to 0.7...

Journal: :تحقیقات آب و خاک ایران 0
امیر گرد نوشهری محمدحسین امید صلاح کوچک زاده

in a control structures, it is often preferred to minimize the gate width while utilizing the canal width in full for a stilling basin. therefore, to reach this, a gradually diverging stilling basin may be used. in this study, the effect of broad-crested sill on the expanding hydraulic jump in a rectangular channel was investigated. a total number of 79 tests were carried out for the range of i...

ژورنال: علوم آب و خاک 2017

Hydraulic jump is the most common method of dissipating water’s kinetic energy in downstream of spillways, shoots and valve. In this paper, Support Vector Machine (SVM) method, as a machine learning method, have been used to estimate hydraulic characteristics such as the sequent depth ratio, jump length and energy loss in three different sudden expansions stilling basins, and the rate of ...

ژورنال: علوم آب و خاک 2019

Stilling basins have been used as an energy dissipater downstream of hydraulic structures. Dimensions of the stilling basins depends on hydraulic jump characteristics. In this research diverging hydraulic jump with an adverse slope using baffle blocks and an end sill have been studied experimentally and effect of diverging angle of the walls, adverse bed slope and baffle blocks on the hydraulic...

نمودار تعداد نتایج جستجو در هر سال

با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید