Hot ring rolling is a highly nonlinear, unsteady-state and asymmetry process which is affected by many parameters. The friction coefficient between the ring ,the driver roll and the idle roll is one of the problems, which has significant effect on the quality of final product. In this study, the effect of these two parameters on hot ring rolling was investigated based on a 3D coupled-thermo mec...

hot rolling of a large ring of titanium alloy (lrt) is a highly nonlinear incremental forming process with coupled mechanical and thermal behaviors (mtbs) which significantly affect microstructure and properties of the ring. the feed rate of idle roll and the rotational speed of driver roll have major effects on ovality of the ring. in this paper, the effects of these parameters on the ovality ...

The defect in work rolls directly influence the forming cost and the final shape of the product. The researchers tend to investigate the thermo-mechanical stress in work roll of rolling machines. These stresses may reduce the roll life. Since the investigation of the thermo-mechanical stress in work roll with real-conditions is complex, comprehensive studies by means of numerical methods are av...

Hot forging of an Fe-Ni-Co alloy used for aeronautical purposes has been modeled using the commercial software ABAQUSTM/Explicit in order to obtain all the mechanical and thermal information to proceed with piercing and ring rolling. The material used is a 909 Incoloy type super alloy and it is used for the energy generation industry. Information of the constitutive behaviour of the alloy was i...

in this work, effects of homogenization time of 3 to 13 h at 1200 °c on the grain refinement of as-cast aisi 301 stainless steel after different hot rolling conditions were investigated. the results showed that the minimum grain size of 16±7 mm was achieved when homogenization took place at 1200 °c for 9 h followed by hot rolling at temperature range of 1000–1200 °c with strain of 0.8 and strai...