spatial distribution of electric field amplitude has an essential role in laser-induced damagemulti-layer coating. a new method introduced in this paper to reduce the electric field intensityeffectively within the high index layers in multi-layer reflectors that are irradiated by high power lasers.the design is based on specific non-quarter wave pairs, assuming the number of layers is held cons...

We report a new technique for the rapid fabrication of microstripe cylindrical and toroidal mirrors with a high ratio (>10) of the two principal radii of curvature (RoC(1)/RoC(2)), and demonstrate their effectiveness as mode-selecting resonator mirrors for high-power planar waveguide lasers. In this process, the larger radius of curvature (RoC(1)) is determined by the planar or cylindrical shap...

Advanced laser interferometer gravitational-wave detectors use high laser power to achieve design sensitivity. A small part of this power is absorbed in the interferometer cavity mirrors where it creates thermal lenses, causing aberrations in the main laser beam that must be minimized by the actuation of "ring heaters," which are additional heater elements that are aimed to reduce the temperatu...

The present article is concerned with an analytical solution for some parts of rare earth doped fiber laser equations. The presented model is valid for both four and three-level fiber lasers consisting high reflectivity mirrors. A typical method to obtain initial value in the numerical solutions of fiber laser equations is shooting method, which is based on an iteration process. Whereas this st...

We report the demonstration of a diode-pumped chirped pulse amplification Yb:YAG laser that produces λ=1.03  μm pulses of up to 1.5 J energy compressible to sub-5 ps duration at a repetition rate of 500 Hz (750 W average power). Amplification to high energy takes place in cryogenically cooled Yb:YAG active mirrors designed for kilowatt average power laser operation. This compact laser system wi...

High-reflectivity fused silica mirrors are at the epicentre of today’s advanced gravitational wave detectors. In these detectors, the mirrors interact with high power laser beams. As a result of finite absorption in the high reflectivity coatings the mirrors suffer from a variety of thermal effects that impact on the detectors’ performance. We propose a model of the Advanced LIGO mirrors that i...