نتایج جستجو برای: heat of combustion

تعداد نتایج: 21190941  

پایان نامه :وزارت علوم، تحقیقات و فناوری - دانشگاه تبریز 0

a semi-empirical mathematical model for predicting physical part of ignition delay period in the combustion of direct - injection diesel engines with swirl is developed . this model based on a single droplet evaporation model . the governing equations , namely , equations of droplet motion , heat and mass transfer were solved simultaneously using a rung-kutta step by step unmerical method . the...

پایان نامه :وزارت علوم، تحقیقات و فناوری - دانشگاه صنعتی اصفهان 1389

run-out-table (rot) is located between last finishing stand and down coiler in a hot strip mill. as the hot steel strip passes from rot, water jets impact on it from top and bottom and strip temperature decreases approximately from 800-950 °c to 500-750°c. the temperature history that strip experience while passing through rot affects significantly the metallurgical and mechanical properties, s...

پایان نامه :وزارت علوم، تحقیقات و فناوری - دانشگاه شیراز - دانشکده علوم 1390

any change in the refractive index of a laser active medium can lead to serious degradation of beam quality, laser beam modes, laser performance and variation in the intensity distribution. alteration in the refractive index of laser active medium is especially notable in high power lasers. it is clear that in the laser beam production, the pumping agent induces a great amount of heat which...

Journal: :iranian journal of chemistry and chemical engineering (ijcce) 2004
m. h. hamzeh sayed mojtaba sadrameli

abstract:a mathematical model for the performance prediction of an industrial glass furnace with six ports on each side was developed. this model comprises of two main sub-models for the combustion chamber and glass-melting tank. the first sub-model consists of the models for the combustion and the heat transfer model including, radiation, convection and conduction. the fuel combustion in atmos...

Journal: :تحقیقات موتور 0
رحیم خوشبختی سرای r. khoshbakhti saray سید وهاب پیروزپناه s.v. pirouzpanah

the dual fuel engines at part loads inevitably suffer from lower thermal efficiency and higher carbon monoxide and unburned fuel emission. this work is carried out to investigate combustion characteristics of a dual fuel (dieselgas) engine at part loads, using a single zone combustion model with detailed chemical kinetics for combustion of natural gas fuel. the authors developed software in whi...

M. H. Hamzeh Sayed Mojtaba Sadrameli,

ABSTRACT:A mathematical model for the performance prediction of an industrial glass furnace with six ports on each side was developed. This model comprises of two main sub-models for the combustion chamber and glass-melting tank. The first sub-model consists of the models for the combustion and the heat transfer model including, radiation, convection and conduction. The fuel combustion in a...

R. Khoshbakhti Saray, S.V. Pirouzpanah,

The dual fuel engines at part loads inevitably suffer from lower thermal efficiency and higher carbon monoxide and unburned fuel emission. This work is carried out to investigate combustion characteristics of a dual fuel (dieselgas) engine at part loads, using a single zone combustion model with detailed chemical kinetics for combustion of natural gas fuel. The authors developed software in ...

پایان نامه :وزارت علوم، تحقیقات و فناوری - دانشگاه تربیت مدرس - دانشکده منابع طبیعی 1391

in this study, the effects of oleothermal modification on physical and mechanical peroperties of fir wood (abeis sp.) blocks were examined. at first, some blocks of fir wood with 5 × 20 × 120 cm dimensions were prepared. the blocks were treated in soybean oil. the effects of 3 factors such as treatments temperature (180and 200 °c), holding time (12 and 15 h) and initial moisture content of wood...

2011
Matthew Jones Calvin H Li Abdollah Afjeh GP Peterson

An experimental investigation of the combustion behavior of nano-aluminum (n-Al) and nano-aluminum oxide (n-Al2O3) particles stably suspended in biofuel (ethanol) as a secondary energy carrier was conducted. The heat of combustion (HoC) was studied using a modified static bomb calorimeter system. Combustion element composition and surface morphology were evaluated using a SEM/EDS system. N-Al a...

There are heat losses during the cycle of real engine that are neglected in ideal air-standard analysis. In this paper, the effect of heat transfer on the net output work is shown and thermal efficiency of the air-standard Atkinson and the Dual combustion cycles are analyzed. Comparison of performances of the air-standard Atkinson and the Dual combustion cycles with heat transfer considerations...

نمودار تعداد نتایج جستجو در هر سال

با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید