run-out-table (rot) is located between last finishing stand and down coiler in a hot strip mill. as the hot steel strip passes from rot, water jets impact on it from top and bottom and strip temperature decreases approximately from 800-950 °c to 500-750°c. the temperature history that strip experience while passing through rot affects significantly the metallurgical and mechanical properties, s...

any change in the refractive index of a laser active medium can lead to serious degradation of beam quality, laser beam modes, laser performance and variation in the intensity distribution. alteration in the refractive index of laser active medium is especially notable in high power lasers. it is clear that in the laser beam production, the pumping agent induces a great amount of heat which...

the aim of this paper is eliminating cr(vi) by natural hap. hap is a inexpensive material which is used from bovine critical bone ash in order to remove heavy metal ions like cr(vi). some experiments in different ph are performed (ph=2,3,7). maximum adsorption was appeared at ph=2, dosage=0.3 gr, c0=10 mg/l. cr(vi) removal depends on ph value and initial amount of cr(vi) result of experiments w...

in this study, the effects of oleothermal modification on physical and mechanical peroperties of fir wood (abeis sp.) blocks were examined. at first, some blocks of fir wood with 5 × 20 × 120 cm dimensions were prepared. the blocks were treated in soybean oil. the effects of 3 factors such as treatments temperature (180and 200 °c), holding time (12 and 15 h) and initial moisture content of wood...

in solvo-hydrothermal method, xrd pattern was indicated presence of intermediate of ammonium octatmolybdate and ammonium tetramolybdate, which were changed to stble phase of ?-moo3 annealing. sem images were indicated nanoparticle with semispheical morphology and tem image was demonstrated nanoparticles with a diameter size of 25nm. also in impregnate method. the xrd pattern was shown high crys...