the purposes of this research have been to determine the wastewater quality of a typical railroad repair workshop and to find a way to reduce the concentrations of present contaminants especially oil and grease. the mean concentrations of oil, cod and ss in the wastewater studied were 287.69, 775.85 and 28723, respectively with average daily discharge to be 30-35 m3. three successive treatment ...

Waste-tire-derived crumb rubber was utilized as filter media to develop an efficient filter for ballast water treatment. In this study, the effects of coagulation, pressure filtration and dual-media (gravity) filtration on the performance of the crumb rubber filtration were investigated. The removal efficiencies of turbidity, phytoplankton and zooplankton, and head loss development were monitor...

Forty-eight patients with fever greater than 38.3 degrees C for at least 24 hr despite broad spectrum antibiotics and an absolute granulocyte count less than 1000/microliter were randomly allocated to 4 days of granulocyte transfusions obtained by leukapheresis using filtration (n = 27) or gravity (n = 21) techniques, the latter permitting simultaneous nonmechanical collection of granulocytes a...

Drilling fluid is the most important lifeline of the drilling operation, that main task is facilitate the cuttings removal of the drilling. There are varieties of drilling fluids such as sodium bentonite based-drilling fluid is called “mud” and drilling foam or surfactant based-drilling fluid is called “soap”. The present work aims are study on the modified drilling mud properties by using the ...

Drilling fluid is the most important lifeline of the drilling operation, that main task is facilitate the cuttings removal of the drilling. There are varieties of drilling fluids such as sodium bentonite based-drilling fluid is called “mud” and drilling foam or surfactant based-drilling fluid is called “soap”. The present work aims are study on the modified drilling mud properties by using the ...

OBJECTIVE To evaluate the effects of four types of in-line filters on filtration rate, amphotericin B concentration and particulate matter. METHODS Filtration rates of amphotericin B fluid through in-line filters under maximum gravity flow were examined. The concentrations of amphotericin B and the particulate matter in the non-filtered and filtered amphotericin B fluid at the flow rate of 50...

drilling fluid is the most important lifeline of the drilling operation, that main task is facilitate the cuttings removal of the drilling. there are varieties of drilling fluids such as sodium bentonite based-drilling fluid is called “mud” and drilling foam or surfactant based-drilling fluid is called “soap”. the present work aims are study on the modified drilling mud properties by using the ...

Direct flow (sometimes called “dead end”) filtration is applied when all the fluid to be filtered is driven, typically in industrial applications due to a supply pressure, in a direction perpendicular to a filtering surface; few applications are done by gravity feed. Contaminants are captured within the filtration media or build up on the surface, causing the differential pressure across the fi...