Grate bar is an industrial part which is used in the indurating furnace of an iron ore pelletizing plant. Steel part ofthe grate bars are expected to have high resistance to atmospheric oxidation because of its contact with hot gases(up to 920 °C) during the normal operation of the process. In this study, different samples from several sections ofused grate bars with apparent ...

grate bar is an industrial part which is used in the indurating furnace of an iron ore pelletizing plant. steel part ofthe grate bars are expected to have high resistance to atmospheric oxidation because of its contact with hot gases(up to 920 °c) during the normal operation of the process. in this study, different samples from several sections ofused grate bars with apparent defects were selec...

Flow, mixing, and, size segregation of Municipal Solid Waste (MSW) particles on the traveling grate of a mass-burn waste-to-energy (WTE) combustion chamber is analyzed for understanding those parameters that control the combustion processes and for designing the chamber. In order to quantify these phenomena, a full-scale physical model of the reverse acting grate was built and used for investig...

Most widely used concept for municipal solid waste (MSW) incineration is combustion on a moving grate with energy recovery. In MSW incinerators fresh waste stacked on a grate enters the combustion chamber, heats up by radiation from the flame above the layer and ignition occurs. Ignition front propagates downwards producing heat for drying and devolatilisation of the fresh waste below until it ...

The control of disturbances due to fuel quality variation is important development area in the grate combustion technology. Main challenges in the control of the grate combustion are inhomogeneous fuel, variation in fuel moisture content, non-uniform distribution of fuel on the grate area and high percentage of combustibles in ash. Information on events which occur in the furnace plays an impor...

Mixing of the highly non-homogeneous municipal solid wastes (MSW) on the traveling grate of mass-burn combustion chambers assists the combustion process in waste-to-energy (WTE) facilities. A matrix-based Markov chain model was developed to simulate particle flow and mixing as the solid waste particles travel over a reverse acting Martin grate. The model was used to project the pathway of a sol...

Mixing of the highly non-homogeneous municipal solid wastes (MSW) on the traveling grate of mass-bum combustion chambers assists the combustion process in waste-to-energy (wrE) facilities. A matrix-based Markov chain model was developed to simulate particle flow and mixing as the solid waste particles travel over a reverse acting Martin grate. The model was used to project the pathway of a soli...

Recently, infrared cameras are used in grate firing processes for waste and biomass incineration in order to optimize the process control. These infrared (IR) cameras with a bandpass filter at 3.8 to 4.0 μm allow for a detailed measurement of the solid bed's temperature distribution. Additionally, the current load condition of the grate is of interest for the process control, which cannot be me...

The size reduction of municipal solid waste (MSW) particles on the reverse acting traveling grate of a waste-to-energy (WTE) combustion chamber was estimated by means of a numerical model combining the particle size distributions (PSD) of MSW and combustion residues and the Shrinking Core Model (SCM). This new integrated model was used to simulate the particle behavior on the grate. During thei...