This study is based on the Shihmen Reservoir silt, where the largest quantity of silt is deposited and is located right next to the National Taiwan University of Art, and with combinations of other simple components, like various kinds of clay, plant ashes or other raw materials, to produce quality glazes that can perform artistic charm and give great additional values. The development of the n...

luster glaze technique is, in fact, using luster glaze in painting and decorating on the glaze which is heated in reduced kiln as a third step. luster glaze is formation of a very thin layer of silver and copper nanoparticles with a metallic luster in different color range formed on the surface of the glaze during the third stage of heating in reduction condition. luster glazed art’s peak, in i...

We present the first nanoscale investigation of silica glaze. High resolution transmission electron microscopy of a rock coating from the Ashikule Basin, Tibetan Plateau, reveals the presence of spheroids composed predominantly of silicon and oxygen with diameters ranging from 20 nm to 70 nm. While silica glaze spheroids co-exist with manganese-rich rock varnish in the same sample, the differen...

Manganiferous rock varnish (desert varnish) is common in subtropical deserts, but coatings of amorphous silica glaze dominate rock surfaces of the same lithology and exposed to similar amounts of annual precipitation in the rain shadows of the large tropical shield volcanoes such as those in Hawaii. Lacking an explanation for this contrast, a two decade-long laboratory experiment tested importa...

The purpose of this study was to evaluate the effect of different surface treatments of yttria-stabilized tetragonal zirconia (Y-TZP) on bond strength durability and marginal discrepancies. For adhesion testing, 144 specimens of VITA In-Ceram YZ ceramic for InLab were obtained (5.25×3.75×4.5 mm) and divided into six groups (n=24) according to the surface treatment: 1) Control (CRTL): untreated;...

This paper examines inherent tensions between the medical glaze and that of an extended glaze, and the ways in which they historically have been brought out as conflicts over inspection schemes in the school medical service. Following an outline of two contrasting models of inspection, the empirical anallysis compares the early formation and shaping of inspection schemes in Britain and Norway.

examining the role of glaze \vare pottery in the social lives of the late precontact and early contact Pueblos. By tracing the circulation of spe­ cialized knowledge, raw materials, and the glaze-painted pots themselves, through interactive networks ofvarying sizes and scales, these researchers reveal how glaze ware production, distribution, and use articulated with a variety of dynamic histori...

In this paper, a new fuzzy logic-based approach to production scheduling in the presence of uncertain disruptions is presented. The approach is applied to a real-life problem of a pottery company where the uncertain disruption considered is glaze shortage. This disruption is defined by two parameters that are specified imprecisely: number of glaze shortage occurrences and glaze delivery time. T...

In this article, glaze with different colorants was applied to tile specimens manufactured by incinerated sewage sludge ash (ISSA) and clay. Improvements using different amounts of colorants, and glaze components and concentrations on tile bodies were investigated. Four different proportions of clay (by weight ratio) were replaced by ISSA. Tiles of size 12 cm x 6 cm x 1 cm were made and left in...

In this paper, preparation of SrAl2O4:Eu,Dy luminescent pigment has been investigated. Coprecipitation as a low cost and facile method was selected. X-ray diffraction patterns indicated the formation of SrAl2O4:Eu,Dy phase through calcinations process above 800 °C. Moreover, a few amount of silica caused the structural transformation to alumina silicate phase. Transparent glaze which consist of...