the effect of shear rate on dissolution of carbon dioxide in viscoelastic wheat flour matrix and cell density in a glass barrel twin screw extruder is investigated. it is found that by increasing the shear rate there will be a decrease in the required thermodynamic conditions and hence, it improves blowing agent dissolution and increases the cell density. shear rate breaks up big bubbles and he...

A new algorithm for simulation of non-isothermal flow in a twin-screw extruder is introduced. In the new algorithm, the finite element mesh of tetrahedral elements is created in the complete barrel including the space occupied by the screws. By partitioning the tetrahedral elements which are intersected by the screw surfaces into two tetrahedral, pyramidal or prismatic finite elements, the new ...

In order to better understand and motivate students to the needs of dynamic modeling and multivariable (MVSISO) design consideration, the case-study of a twinscrew food extruder provides a real-life example with all the requisite components necessary for unit operations management. The study provides a two-input, two-output system able to be simulated via Simulink model that requires knowledge ...

Flow of a polymer in an intermeshing co-rotating twin-screw extruder is simulated. Effect of elongational viscosity on the flow is analyzed using independent powerlaw models for the shear and elongational viscosities. Axial component of the velocity is found to be maximum in the intermeshing region of the extruder. Axial component of velocity, which determines the throughput of the extruder, de...

The effects of variable moisture content, screw speed and barrel temperature on the physicochemical properties of red ginseng powder extrudates were investigated. The raw red ginseng powders were processed in a co-rotating intermeshing twin-screw extruder. Primary extrusion variables were feed moisture content (20 and 30%), screw speed (200 and 250 rpm) and barrel temperature (115 and 130°C). E...

the influence of maleic anhydride-polypropylene (mapp) (0, 2, 3 and 5%) as a compatibilizer on the wettability of polypropylene/wood flour/glass fiber hybrid composites was studied by using the contact angle determination technique. sample slats with a cross section of 10×70 mm were made by a twin screw extruder. specimens were conditioned at room temperature and the angles between the water dr...

Feed ingredients and complete feeds are exposed to varying degrees of heating during manufacturing and processing. Heat treatment of soybeans is necessary to de-nature endogenous trypsin inhibitors and maximize nutritional value, but overheating can damage protein and reduce nutritional value. This study was conducted to determine the effects of extrusion cooking, the primary method of aquafeed...

Most plastics products are made from a base polymer mixed with complex blends of materials known collectively as additives, to ensure that the physical, mechanical and surface properties of the final product is optimised in all aspects. This will include safer, cleaner product possessing optimal colour and properties. Fine additives such as fillers or coloured pigments are most widely used and ...

Biofuels from biomass have the potential to reduce the dependency on fossil fuels. An efficient pretreatment method is required to accomplish the target of the Energy Act 2005. Extrusion could be a viable continuous pretreatment method to be explored. The objectives of the current study were to investigate the influence of screw speed and barrel temperature on sugar recovery from the selected w...

blends of sorghum and soybean flours were processed in a co-rotating twin screw extruder to prepare expanded product. response surface methodology (rsm) was used to study the effect of soya level (sl), feed moisture (fm), barrel temperature (bt) and screw speed (ss) on extruder system parameters and physical properties of the extrudate. response variables were product temperature (pt), motor to...