this paper investigates the effect of different methods of carbon nanotubes distribution in a thin matrix on static and dynamic behavior of the nanocomposite. five different symmetric patterns of distribution are considered, including four parabolic patterns and a linear one. for each pattern, the effective mechanical properties of the resultant nanocomposite are calculated using the rule of mi...

functionally graded aluminium/zirconia metal matrix composite was fabricated using stir casting technique followed by horizontal centrifugal casting process and a hollow cylindrical functionally graded composite (150 x 150 x 16 mm) was obtained with centrifuging speed of 1200 rpm. the microstructural evaluation and hardness test was carried out on the outer and inner surface of the functionally...

In this study, functionally graded Ni-Al2O3 composite coating (FGN-A) has been produced from nickel Watt’s bath containing different concentrations of Al2O3 particles. For this, different composite coatings were electroplated in the same bath with different particles concentration to find the optimum concentration of particles in which the maximum content with uniform distribution of Al2O3 part...

this article gives an approach to predict the springbackward phenomena during post solidification cooling in a functionally graded hybrid composite cylindrical shell with transverse isotropic structure. here the material properties are considered to be given with a general parabolic power-law function. during theoretical analysis, appropriate transform is introduced in the equilibrium equation ...

Functionally graded aluminium/zirconia metal matrix composite was fabricated using stir casting technique followed by horizontal centrifugal casting process and a hollow cylindrical functionally graded composite (150 x 150 x 16 mm) was obtained with centrifuging speed of 1200 rpm. The microstructural evaluation and hardness test was carried out on the outer and inner surface of the functionally...

The aim of this paper is to compare the static deflections and stress results of layered and functionally graded composite beams under static load. In the comparison study, the results obtained for a cantilever beam under point load. The Timoshenko beam and the Euler-Bernoulli beam theories are used in the beam model. The energy based Ritz method is used for the solution of the problem and alge...

This study provides an approach to predict the springback phenomenon during post-solidification cooling in a functionally graded hybrid composite cylindrical shell with a transverse isotropic structure. Here, the material properties are given with a general parabolic power-law function. During the theoretical analysis, an appropriate transformation is introduced in the equilibrium equation, whi...

Although titanium/hydroxyapatite composite is an attractive material for dental implants, it would be more useful if it could be produced as a functionally graded material (FGM). In this paper, microstructure and microhardness of a five-layer titanium/hydroxyapatite functionally graded material has been investigated. First, titanium and hydroxyapatite (HA) powders were mixed with the Ti to HA v...