background: fracture load of implant-supported restorations is an important factor in clinical success. this study evaluated the effect of two techniques for screw access hole preparation on the fracture load of cement-screw retained implant-supported zirconia-based crowns. methods: thirty similar cement-screw retained implant-supported zirconia-based maxillary central incisor crowns were evalu...

objective : the aim of this study was to evaluate fracture characteristics of rigid two-tooth segments splinted with fiber reinforced composite (frc), with and without application of simulated masticatory forces. material and methods: in this experimental study, 80 extracted maxillary bicuspids were joined in pairs from the buccal aspect using frc. the specimens were divided into two groups. in...

in this paper, the mean value of strain energy density criterion has been used to predict the critical fracture load in specimens with u-shaped notch under bending loads. an equation for calculation of averaged strain energy density in this zone has been presented. bending loads under mode i have been considered. two cases have been studied: 1) the control volume only includes the semicircular ...

this study investigates propagation of mode i crack in b70 pre-stressed concrete sleepers by fracture mechanics approach. a new experimental analysis is done for notched b70 pre-stressed concrete sleepers with replica test and image analysis. a scanning electron microscope test (sem) and an image analysis are applied for the replica test in order to determine crack length and crack mouth openin...

The study of mechanical behavior of the structural steel S400 under quasi- static and dynamic loading has been the subject of this investigation. In oder to obtain different stress - triaxiality conditions the specimens were notched with 1, 1.5, 2 and 3.5 mm notch radius. The results of fractography show as the velocity of tension increases, ductility reduces and a ductile-brittle transition oc...

This study investigates propagation of mode I crack in B70 pre-stressed concrete sleepers by fracture mechanics approach. A new experimental analysis is done for notched B70 pre-stressed concrete sleepers with Replica test and image analysis. A scanning electron microscope test (SEM) and an image analysis are applied for the Replica test in order to determine crack length and crack mouth openin...

Biomechanical tests are widely used in animal studies on osteoporotic fracture healing. However, the biomechanical recovery process is still unknown, leading to difficulty in choosing time points for biomechanical tests and in correctly assessing osteoporotic fracture healing. To determine the biomechanical recovery process during osteoporotic fracture healing, studies on osteoporotic femur fra...

INTRODUCTION Distal forearm fracture is one of the most frequently observed osteoporotic fractures which may occur as a result of low energy falls such as falls from a standing height and may be linked to the osteoporotic nature of the bone especially in the elderly. In order to improve both the diagnosis of high fracture risk individuals and the fracture prevention methods, the influence of ex...

There are few informations about the influence of cusp inclination on the fracture strength of implant-supported crowns. The study aimed to evaluate the influence of cusp inclination and retention type on fracture load in implant-supported metal-ceramic single crowns. Sixty crowns were made, classified as cemented and screw-retained with screw access hole (SAH) sealed or not. Standard (33°) and...

The purpose of the present study was to determine the relationship between cross-sectional design and fracture load using a static load bearing test in yttria-stabilized tetragonal zirconia polycrystal ceramic frameworks on a molar fixed partial denture. The test framework was designed as a 3-unit bridge with two abutment teeth at the second premolar and second molar of the mandible. The cross-...