Fukui’s conical cup test is the one of the formability characteristics evaluation for various sheet metals. The formability characteristics such as diametrical ratio, maximum drawing load, depth of cup up to fracture are to be evaluated. This test is related to drawing test. This test can be performed by using parameters such as friction, process parameters and without blank holder. In fukui’s ...

An indication of the formability of metallic sheet is determined using a correlation between nondestructively measurable ultrasonic properties and a formability index. A calibration relation is initially established by measuring ultrasonic velocities at various angles to the rolling direction of sheet specimens with noncontacting electromagnetic acoustic transducers, calculating an ultrasonic c...

in this research formability behavior and texture of st14 low carbon steels produced by foolad mobarakeh plant for deep drawing application had been studied. plate textures were characterized by x-ray diffraction technique. to evaluate formability behavior one dimensional tensile test was carried out and related parameters were recognized. moreover eriksson experiment and spherical pattern prin...

Mg alloys are promising candidates for automotive applications due to their low density and high specific strength. However, their widespread applications have not been realized mainly because of poor formability at room temperature, arising from limited number of active deformation systems and strong basal texture. It has been recently shown that Mg-Zn-Ca alloys have excellent stretch formabil...

Microstructure evolution, mechanical properties, formability, and texture development were determined for AA6111 samples processed by asymmetric rolling (ASR) with different roll friction, velocity, or diameters, conventional rolling (CR), and equal-channel-angular pressing (ECAP). Highly elongated or sheared grain structures were developed during ASR/CR and ECAP, respectively. ASR led to impro...

Laser assisted spin forming is used to process a galvanized Dual Phase steel with minimum damage to coating, microstructure and material properties. Effective increase in formability was achieved, but no evidence of recrystalization, neither drop in forming force was detected. The paper discusses the possible mechanism of formability improvement through the analysis by EBDS of laser assisted fo...

Limiting dome height (LDH) tests were used to evaluate the formability of laser butt welded blanks of the dual phase 980 steel in comparison with the base metal. Two different lasers were used: diode and Nd:YAG, giving a wide range of welding thermal cycles. A sharp decrease in LDH was observed in the welded specimens due to the formation of a softened zone in the outer heat affected zone. Soft...

The paper is focused on issues of processing of non-ferrous metals in practice, namely on Mg-Al-Zn based on magnesium alloys with graded Al contents. It is well known that forming of these alloys is difficult since this feature is caused by their crystallographic arrangement. Nevertheless, application of appropriate methods of forming, such as e.g. some of SPD processes, makes it possible to ac...

The mechanical properties, the creep response and the microstructural features of P91 steel have been extensively investigated in recent years since this steel and its derivatives have been used for the production of pipes and tubes. Nevertheless, in plant experience on rolling facilities, showed that the formability of different heats of similar composition can be dramatically different. The o...

The cold formability of sheets is defined as the ability of material to continuously change its shape and dimensions due to an action of external forces without its failure under particular conditions. The formability of materials is influenced by all factors participating in the forming process, namely the sheet material, the product type, the tool and the production technology. The formabilit...