Nanocomposite films consisting of gold inclusions in the polytetrafluoroethylene (PTFE) matrix were obtained by thermal vacuum deposition. Annealing of the obtained films with different temperatures was used to measure varying of film morphologies. The dependence of optical properties of the films on their morphology was studied. It was established that absorption and profile of the nanocomposi...

copper sulphide (cu 2 s) thin films at different thicknesses and annealing temperatures were deposited onto glass substrate by vacuum evaporation method. xrd study reveals the phase transformation of cu     2 s film at higher thickness. optical and resistivity study show the phase transformation of the film from cu     2 s to cus when they are annealed at higher temperature. sem st...

Polypyrol film was deposited on SS304by employing CPCvoltametery method, then coated with nano TiO2 (PPy/TiO2 )and used as a photocatalysis for degradation of somedyesacid fushin, methylenblue, methyl orange and methyl red. The SEM and XRD analysis indicated nano size of TiO2 deposits as 20nm on the polypyrol film. The UV result of absorption revealed that this film increased the rate of degrad...

This paper reports the correlation between film thickness, nanostructure and DC electrical properties of copper thin films deposited by PVD method on glass substrate. X-ray diffraction (XRD) and atomic force microscopy (AFM) were used for crystallography and morphology investigation, respectively. Resistivity was measured by four point probe instrument, while a Hall effects measurement system w...

This paper reports the correlation between film thickness, nanostructure and DC electrical properties of copper thin films deposited by PVD method on glass substrate. X-ray diffraction (XRD) and atomic force microscopy (AFM) were used for crystallography and morphology investigation, respectively. Resistivity was measured by four point probe instrument, while a Hall effects measurement system w...

The dependence of film surface roughness and porosity on lattice size in a porous thin film deposition process is studied via kinetic Monte Carlo simulations on a triangular lattice. For sufficiently large lattice size the steady-state value of the expected film porosity has a weak dependence on the lattice size and the steady-state value of the expected surface roughness square varies linearly...

In this study the effect of crystallite size reduction and microstructure on the electrochemical corrosion behavior of nanocrystalline nickel (NC Ni) were investigated using Tafel polarization and electrochemical impedance spectroscopy (EIS) measurements in 10 wt.% NaOH. NC Ni coatings were produced by direct current electrodeposition using chloride baths in presence and absence of saccharin as...

Background: The accuracy and the reproducibility of radiotherapy can be provided by using immobilization devices such as thermoplastic masks. In head and neck cancer radiotherapy, the patients are mostly immobilized by using thermoplastic masks. In this study, the effect of the thermoplastic mask to the surface and buildup region doses was investigated by using Markus parallel plate ion chamber...

background: the monte carlo method is the most accurate method for simulation of radiation therapy equipment. the linear accelerators are currently the most widely used machines in radiation therapy centers. methods: in this work, a monte carlo modelling of the siemens oncor linear accelerator in 6 mv and 18 mv beams was performed. the results of simulation were validated by measurements in wat...