A new design concept is introduced to control the near-wall integration between the hot-gas boundary layer and the cooling jets in order to enhance the adiabatic film cooling effectiveness of the gas turbine blades. In this new approach, another film cooling port, having a very low blowing ratio, which prevents formation of the counter-rotating vortex pare, is applied just upstream of the main ...

in this paper, direct numerical simulation of two-phase incompressible gas-liquid flow for simulation of bubble motion in a microtube is presented. microtube radius is 10 µm. the interface is tracked using volume of fluid (vof) method with continuous surface force (csf) model. the flow is solved using a finite volume scheme, based on piso algorithm. numerical simulation is performed on a axisym...

An experimental study of hydrodynamics of film cooling is performed by using a single longitudinal slot on a cylindrical model simulated to the leading edge of the gas turbine blade. The model is set up into the test section of an open-circuit induced flow wind tunnel which provides the main flow. The injected air, as a secondary film flow, produced from a high pressure compressor is considered...

Natural gas usually contains significant amounts of acid gases when it is extracted from underground reservoirs. Therefore, it must be treated by appropriate processes to remove these acidic components. In this study, the simultaneous absorption of carbon dioxide and hydrogen sulfide from natural gas into diethanol amine solution was simulated using CFD. Absorption process was performed in a we...

A suction line of a refrigeration cycle with vertical upward flow is one area where the refrigeration oil tends to accumulate. This paper discusses the flow characteristics of the oil film in a pipe with the vertical upward flow. Air and oil two-phase flow is used as the first step of the study and the flow pattern of the oil film in the vertical upward flow is observed. The oil film thickness ...

residual gas saturation is one of the most important parameter in determining recovery factor of water-drive gas reservoir. visual observation of processes occurring at the pore level in micromodels can give an insight to fluid displacements at the larger scale and also help the interpretation of production performance at reservoir scale. in this study experimental tests in a glass micromodel w...

in this paper, static performance characteristics for a finite lenght two-lobe journal bearing lubricated with micropolar fluid is studied. using finite element method, steady-state film pressure is obtained by solving modified reynolds equation, based on micropolar lubrication theory. with the help of film pressure in bearing, the static performance characteristics in terms of load carrying ca...