the microstructure of dual phase steels can be considered as a matrix of ferrite phase reinforced by martensite particles. recent measurements show that the mechanical properties of the ferrite phase are changed with the distance from the martensite grains. in this paper, a new method has been proposed to consider this phenomenon in finite element modeling of dual phase steels microstructure. i...

The microstructure of dual phase steels can be considered as a matrix of ferrite phase reinforced by martensite particles. Recent measurements show that the mechanical properties of the ferrite phase are changed with the distance from the martensite grains. In this paper, a new method has been proposed to consider this phenomenon in finite element modeling of dual phase steels microstructure. I...

The following nomenclature is used in this Chapter: a allotriomorphic ferrite aa acicular ferrite a w Widmanstatten ferrite ~ delta-ferrite !:i.0' increment in yield stress I austenite € true strain € true average strain €~ true plastic strain in softer phase of a dual-phase steel €~I true plastic strain in harder phase of a dual-phase steel €UTS true strain at ultimate tensile stress €y true s...

cobalt ferrite nano-powder have been obtained through a hydrothermal method with 2:1 molar ratio of fe:co without using any surfactant. x-ray diffraction (xrd) and scanning electron microscopy (sem) were used to consider the structural and morphological properties of cofe2o4 nano-particles. also, edax spectroscopy applied to evaluate the chemical composition. results demonstrated that 15 hr hyd...

the effect of ferrite grain size on the fatigue and tensile properties of dual phase steels with a 0.25 volumefraction of martensite (vm) under different heat treatments was investigated. the heat treatments werehomogenized at 1200 oc along with several subsequent normalizations at 910 oc, resulting in differentmicrostructures and mechanical properties. after heat treatment, the obtained steels...

A steel has recently been designed to benefit from the deformation induced transformation of retained austenite present in association with bainitic ferrite. It has as its major microstructural component, dendrites of d-ferrite introduced during solidification. The d-ferrite replaces the allotriomorphic ferrite present in conventional alloys of this kind. The authors examine here the stability ...

The concept of a cyclotron-resonance maser (CRM) with a ferrite loading incorporated in its waveguide is proposed. The CRM interaction occurs between the rotating electron beam and the em wave propagating along a longitudinally magnetized ferrite medium. The ferrite anisotropic permeability resembles the CRM susceptibility in many aspects, and particularly in their similar response to the axial...

Mn–Zn ferrite powders (Mn0.5Zn0.5Fe2O4) were prepared by the nitrate–citrate auto-combustion method and subsequently annealed in air or argon. The effects of heat treatment temperature on crystalline phases formation, microstructure and magnetic properties of Mn–Zn ferrite were investigated by X-ray diffraction, thermogravimetric and differential thermal analysis, scanning electron microscopy a...