Abstract— This paper develops a method of modelling and designing air-gapped ferrite inductor as filter for large current application of grid-tied inverter. The design method incorporates magnetization curve of the ferrite materials while the modelling of the inductor is based on inverse JilesAtherton model. The dynamic performance of the designed ferrite inductor in the DC-AC inverter circuit ...

Cobalt ferrite (CoFe2O4) possesses excellent chemical stability, good mechanical hardness and a large positive first order crystalline anisotropy constant, which made this ferrite a promising candidate for magneto-optical recording media. In addition to precise control on the composition and structure of CoFe2O4, the success of its practical application will depend on the capability of controll...

The sensitive response of the dielectric permittivity under the application of magnetic fields in Mn0.60Zn0.40Fe2.12O4+ polycrystalline ferrite is presented. A magnetic field of 3.5 kOe induced a giant magnetodielectric MD= H − 0 / 0 response, of 1800% at f =7 MHz, at room temperature. The ferrite exhibits a large magnetic field-induced frequency response of 180 Hz/Oe. We suggest that this effe...

Ferrites have always been a subject of great interest from point of view of magnetic application, since the fist compass to present date. In contrast, the scientific interest for iron based magnetic oxides decreased after Ørsted discovery as they where replaces by coil as magnetizing sources. Néel discovery of ferrimagnetism boosted again interest and leads to strong developments during two dec...

Composite material based on Fe3Si micro-particles and Mn-Zn nano-ferrite was prepared using powder metallurgy technology. The sol-gel followed by autocombustion process was used for synthesis of Mn0.8Zn0.2Fe2O4 ferrite. 3 wt.% of mechanically milled ferrite was mixed with Fe3Si powder alloy. Mixed micro-nano powder system was homogenized by the Resonant Acoustic Mixing using ResodynLabRAM Mixer...

The effect of different austenite grain size and different cooling rates on the austenite to ferrite transformation temperature and different ferrite morphologies in one Nb-microalloyed (HSLA) steel has been investigated. Three different austenite grain sizes were selected and cooled at two different cooling rates for obtaining austenite to ferrite transformation temperature. Moreover, samples ...

Broadband transformers are not difficult to understand. They are commonplace in today's amateur technology. Most broadband transformers are wound on ferrite toroids or rods. Some are wound on powdered-iron cores, while others are formed on pot or cup cores. We will confine our discussion to transformers that are wound on ferrite toroids or balun cores (sometimes called "binocular" cores. Basic ...

A phase-steered microstrip antenna array is presented, suitable for application as a mobile vehicle satellite terminal. Phase shifters are implemented on a hybrid dielectric-ferrite substrate, and use is made of the phase transition near the cut-off region of the biased ferrite. Small permanent magnets and carefully biased ferrites remove the need for large applied electromagnetic fields. 2-, 3...

Introduction Magnetic oxide nanomaterials, including iron oxide (Fe3O4 and γ-Fe2O3), spinel ferrites (MFe2O4; M=Mn, Zn, Cr, Ni, or Co) and hexagonal ferrite (MFe12O19, M=Ba and Sr) are attracting much attention due to their wide application potentials in advanced magnets, electronic devices, information storage, magnetic resonance imaging (MRI), and drug-delivery technology [1-6]. Hence, the sy...