نتایج جستجو برای: feed flow rate

تعداد نتایج: 1431901  

Ali Kargari, Fatemeh Khazaali

In this paper, the removal of phenol by using aqueous solution in a low pressure reverse osmosis membrane was investigated. The effect of feed pressure, feed concentration, feed flow rate and feed pH on phenol rejection was investigated. The results showed that feed pH is the most affective parameter on the phenol rejection. Rejection of phenol increased with increasing pH from 2 to 10 under th...

Journal: :journal of membrane science and research 0
fatemeh khazaali department of petrochemical engineering, amirkabir university of technology (tehran polytechnic), mahshahr campus, mahshahr, iran ali kargari department of chemical engineering, amirkabir university of technology (tehran polytechnic), tehran, iran

in this paper, the removal of phenol by using aqueous solution in a low pressure reverse osmosis membrane was investigated. the effect of feed pressure, feed concentration, feed flow rate and feed ph on phenol rejection was investigated. the results showed that feed ph is the most affective parameter on the phenol rejection. rejection of phenol increased with increasing ph from 2 to 10 under th...

In this work, sweeping gas membrane distillation (SGMD) process was used for concentrating of glucose syrup. The main questions in this work include: is SGMD process practical for concentrating of glucose solution prior the fermentation step in bioethanol process?. and are the commercially available hydrophobic membranes sufficient enough to develop the SGMD process in pilot scale for this issu...

Journal: :journal of chemical and petroleum engineering 2014
mojtaba ahmadi yasser vasseghian

the main objective of this study is the modelling and optimization of an industrial hydrocracker unit (hu) by means of adaptive neuro fuzzy inference system (anfis) model. in this case, some data were collected from an industrial hydrocracker plant. inputs of an anfis include flow rate of fresh feed and recycle hydrogen, temperature of reactors, mole percentage of h2 and h2s, feed flow rate and...

Mojtaba Ahmadi, Yasser Vasseghian

The main objective of this study is the modelling and optimization of an industrial Hydrocracker Unit (HU) by means of Adaptive Neuro Fuzzy Inference System (ANFIS) model. In this case, some data were collected from an industrial hydrocracker plant. Inputs of an ANFIS include flow rate of fresh feed and recycle hydrogen, temperature of reactors, mole percentage of H2 and H2S, feed flow rate and...

In this work, the effects of permeate pressure and feed flow rate on the performance of a composite polyvinyl alcohol (PVA) membrane in the removal of benzene from gasoline by pervaporation (PV) were evaluated. The results indicate the remarkable effect of permeate pressure on membrane performance as reducing permeate pressure (higher vacuum) from 30 to 3 mmHg causes the total flux to increase ...

پایان نامه :وزارت علوم، تحقیقات و فناوری - دانشگاه رازی - دانشکده فنی و مهندسی 1389

چکیده: کاربردهای غشاء اسمز معکوس در فرایندهای تصفیه آب، بویژه صنایعی که نیاز به آب با خلوص بالا دارند، روز به روز در حال افزایش می باشد. با توجه به اهمیت های فرایندی و اقتصادی، فرایند نمکزدایی توسط غشاء اسمز معکوس،لزوم بهینه کردن فرایند تولید به منظور افزایش عمر مدول های ro و کمک به پایداری تولید و کاهش هزینه های تعمیراتی و از این دست امور محسوس است. در این کار ابتدا براساس داده های تهیه شده ا...

Journal: :Review of Scientific Instruments 1958

To control the quality of reverse osmosis (RO) product water and reduce operational costs and environmental impacts by increasing the system’s energy efficiency, it is necessary to identify the influence of process parameters on energy consumption and permeate water quality. This paper introduces a case study focused on the application of Design of Experiments (DOE) method in an industrial-scal...

In the present study, the possibility of concentrating tungsten-copper vein ore in South Chah-Palang was examined using gravity separators including Jig Machine (-2360+600 μm), shaking table (-600+120 μm), and multi-gravity separator (MGS) (-120 μm). The representative sample contains 1.5% WO3 and 5.95% CuO. The main tungsten minerals were ferberite and wolframite and their appropriate liberati...

نمودار تعداد نتایج جستجو در هر سال

با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید