The sonocatalytic performance of the synthesized TiO2/Montmorillonite K10 (TiO2/MMT) nanocomposite was studied in removal of Basic Blue 3 (BB3) from water. The TiO2/MMT nanocomposite was prepared by hydrothermal method. Scanning electron microscope, X-ray diffraction and Fourier transform infrared were used to characterize the synthesized nanocomposite. The average size of TiO2 nanoparticles de...

A new and inexpensive lignocellulose/montmorillonite (LNC/MMT) nanocomposite was prepared by a chemical intercalation of LNC into MMT and was subsequently investigated as an adsorbent in batch systems for the adsorption-desorption of Ni(II) ions in an aqueous solution. The optimum conditions for the Ni(II) ion adsorption capacity of the LNC/MMT nanocomposite were studied in detail by varying pa...

In this work we evaluated the potentiality of a poly(imide) (PI)/organically-modified montmorillonite (O-MMT) nanocomposite membrane for the use in alkaline fuel cells. Both X-ray diffraction and scanning electron microscopy revealed a good dispersion of O-MMT into the PI matrix and preservation of the O-MMT layered structure. When compared to the pure PI, the addition of O-MMT improved thermal...

A novel bio nanocomposite of Carboxymethyl Starch (CMS)-Chitosan (CS)-Montmorillonite (MMT) was developed for Curcumin delivery. To improve Curcumin entrapment into Cs-CMS-MMT, different ratios of Chitosan (Cs), Carboxymethyl Starch (CMS) and MMT were used. Particle size and Curcumin entrapment efficiency (EE) were highly affected by different formulation variables. Polysaccharide concentration...

The nonbiodegradable and nonrenewable nature of plastic packaging has led to a renewed interest in packaging materials based on bio-nanocomposites (biopolymer matrix reinforced with nanoparticles such as layered silicates). Bio-nanocomposite films based on soy protein isolate (SPI) and modified montmorillonite (MMT) were prepared using melt extrusion. The effect of different type (Cloisite 20A ...

Thermoplastic starch, polylactic acid glycerol and maleic anhydride (MA) were compounded with natural montmorillonite (MMT) through a twin screw extruder to investigate the effects of different loading of MMT on structure, thermal and absorption behavior of the nanocomposites. X-ray diffraction analysis (XRD) showed that sample with MMT loading 4phr exhibited exfoliated structure while sample t...

The non-biodegradable and non-renewable nature of plastic packaging has led to a renewed interest in packaging materials based on bio-nanocomposites (biopolymer matrix reinforced with nanoparticles such as layered silicates). Bio-nanocomposite films based on soy protein isolate (SPI) and montmorillonite (MMT) were prepared using melt extrusion. Effects of the pH of film forming solution, MMT co...

A novel heat-sealing performance is achieved by polyethylene (PE) nanocomposites reinforced by ethylene vinyl acetate (EVA) and montmorillonite (MMT). Appropriate nanocomposite design leads to hermetic seals with a general peelable/easy-open character across the broadest possible sealing temperature range. Observations of the fracture seal surfaces by infrared spectroscopy and electron microsco...

Montmorillonite/poly(vinyl alcohol) (MMT/PVA) nanocomposites spanning the complete range of MMT content (0-100 wt%) are prepared by simple evaporation-induced assembly. Effects of MMT content on the structure and mechanical properties of nanocomposites are systematically investigated and exhibit two important transitions at MMT contents of 30 wt% and 70 wt%. In the range of 0-30 wt%, the nanoco...

Poly(vinyl alcohol) (PVA)-montmorillonite (MMT) clay nanocomposite films up to 10 wt% clay concentration were synthesized by aqueous solution grown technique. The relative complex dielectric function, alternating current electrical conductivity, electric modulus and impedance properties of these organic-inorganic nanocomposites were investigated in the frequency range from 20 Hz to 1 MHz at amb...