abstractin this paper, we investigate effect of fe–intermetallic compounds on plastic deformation of closed-cell composite aluminum foam as filler of thin-walled tubes. however, deformation of the aluminum foam-filled thin-walled tubes as crushed-box will be presented in part (ii). composite foams of alsi7sic3 and alsi7sic3-(fe) as closed cell were synthesized by powder metallurgy foaming metho...

AbstractIn this paper, we investigate effect of Fe–intermetallic compounds on plastic deformation of closed-cell composite Aluminum Foam as filler of thin-walled tubes. However, deformation of the Aluminum foam-filled thin-walled tubes as crushed-box will be presented in Part (II). Composite foams of AlSi7SiC3 and AlSi7SiC3-(Fe) as closed cell were synthesized by powder metallurgy foaming metho...

Mn was an important alloying element used in Al-Mg-Mn alloys. However, it had to be limited to a low level (<1.0 wt %) to avoid the formation of coarse intermetallics. In order to take full advantage of the benefits of Mn, research was carried out to investigate the possibility of increasing the content of Mn by studying the effect of cooling rate on the formation of Fe- and Mn-rich intermetall...

Abstract Obtaining a strong bond between aluminum and steel is challenging due to poor wettability melt brittle intermetallic phases forming in the interface. In this research, novel coating method, namely hot dipping of Sn, has been developed treat insert surfaces. Results show that without preheating mold or Sn-coated insert, thin, crack-free, continuous metallurgical bonding layer was achiev...

A nucleation-growth control for Al85Ni10Ce5 glass has transformed to a growth control for Al83Ni10Ce5Si2 glass. That’s to say a small quantity of Si addition can successfully separate the Al phase to single precipitate from a eutectic precipitation composited of Al and other intermetallic compound to synthesize nanostructured materials, characteristic of microstructures with finely dispersed na...