in this paper, three-dimensional modeling of the fatigue crack growth profiles was performed in a simple riveted lap joint. simulation results showed that mode i was dominated on the one side of the plates and the crack straightly grew on this side, while the other side of the plates was in a mixed-mode condition and the crack propagation path was not straight on this side. afterward, the fract...

The fracture of restored teeth is a significant obstacle to lifelong oral health. Recent studies suggest that fatigue cracks originate at flaws introduced during cavity preparation and that fatigue crack growth is a principle cause of restored tooth fractures. In this study, the rate of fatigue crack growth in bovine dentin was estimated under mode I cyclic loading. Double cantilever beam (DCB)...

Fatigue crack growth is examined in P/M 2124 aluminum alloys reinforced with SiC particles (SiCp) and whiskers (SiCw) over a wide spectrum of growth rates from 10 to 10 m per cycle. Effects of aging treatment, orientation of crack growth direction with respect to the rolling direction, mean stress (or stress ratio), and reinforcement volume percent on the fatigue crack growth threshold are inve...

In this paper, the stress intensity factor (SIF) variations along an arbitrarily developing crack front, the non-planar fatigue-crack growth patterns, and the fatigue life of a round bar with an initially straight-fronted surface crack, are studied by employing the 3D symmetric Galerkin boundary element method-finite element method (SGBEM-FEM) alternating method. Different loading cases, involv...

In this study, the pitting type of corrosion growth characteristics, fatigue crack initiation and propagation behavior; axial fatigue tests were carried out on precipitation hardened martensitic Custom 450 steel in the air and 3.5wt% NaCl solution. Using the ratio of the depth to the half-width of the pits; (a/c)= 1.5±0.2 the corrosion pit depth growth law was obtained as a function of stress a...

Fatigue crack growth has been observed recently in ferroelectrics under cyclic electric loading[ Does the crack grow by electric breakdown\ or by the stress _eld near the crack tip< The present paper provides a mechanistic explanation for the electric!_eld!induced fatigue crack growth[ The non!uniform electric _eld near an insulated crack tip might cause domain switching which in turn produces ...

This article presents a study of fatigue-crack propagation behavior in Nitinol, a 50Ni-50Ti (at. pct) superelastic/shape-memory alloy, with particular emphasis on the effect of the stress-induced martensitic transformation on crack-growth resistance. Specifically, fatigue-crack growth was characterized in stable austenite (at 120 8C), superelastic austenite (at 37 8C), and martensite (at 265 8C...

An evaluation of the fatigue crack resistance of human dentin was conducted to identify the degree of degradation that arises with aging and the dependency on tubule orientation. Fatigue crack growth was achieved in specimens of coronal dentin through application of Mode I cyclic loading and over clinically relevant lengths (0 ≤ a ≤ 2 mm). The study considered two directions of cyclic crack gro...

Although the propagation of fatigue cracks has been recognized as a problem of clinical significance in dentin, there have been few fracture mechanics-based studies that have investigated this issue. In the present study, in vitro cyclic fatigue experiments were conducted over a range of cyclic frequencies (1-50 Hz) on elephant dentin in order to quantify fatigue-crack growth behavior from the ...

in the last decade, decrease of the wear rate, increase in the axel load, and the velocity of the trains have changed the main damage mechanism of railway wheels from wear to rolling contact fatigue (rcf). rcf may lead to surface and subsurface cracks. the interaction between wear and rcf, removes the surface cracks, but the subsurface crack propagate gradually, and may lead to deeper and more ...