In this paper, the corrosion behavior of the filled epoxy paint with the rice husk ash RHA on steel substrates in two different corrosive environments natural sea water and 2M sulfuric acid has been studied. Electrochemical impedance spectroscopy EIS was used to evaluate protective properties of different organic coating systems due to the different filler composition. RHA was prepared by heati...

It has been suggested that the epoxy paint used to coat metal substrates in industrial electrostatic painting applications could also be used to mask metal clasps in removable dental prostheses (RDP). The purpose of this study was to evaluate both the influence of thermal cycling and the in vitro roughness of a surface after application of epoxy paint, as well as to assess the micromorphology o...

The ability to measure the thickness of paint on graphite/epoxy composite structures directly would be of benefit in the aerospace industry. The weight reduction would increase fuel mileage for the airline customer. An additional reason for reducing the thickness of paint on graphite/epoxy composites is not as obvious as the weight savings. A concern in the use of composite structures has been ...

Waterborne Epoxy based coatings were prepared by using a water-borne epoxy resin and a suitable hardener. The formulation and optimization procedure were carried out on the bases of experimental designs by the mixture design technique in which the important paint properties are modeled by using special cubic model. The corrosion behavior of these coatings was investigated using electrochemical ...

Organic coatings act as a barrier to a corrosive solution and check the transfer of electrical charge from the corrosive solution. High performance organic paint systems were applied on plain carbon steel substrate with two different primers viz., epoxy Zn phosphate and epoxy Zn rich. Identical intermediate and top coats were applied on them having equal dry film thickness. Both uncontrolled lo...

Objective To investigate the biological effect of a new method to camouflage the cobalt-chromium (CoCr) metal structure of an RPD, onto which an electrostatic paint was applied. Methods In vitro cytotoxicity of epoxy Politherm NOBAC30C (Weg Industries SA, Santa Catarina, Brazil) in combination with polished CoCr was tested by placing it in contact with cultured human fibroblasts and comparing i...

Stresses can be measured by X-ray diffraction, not only in metals but also in polymeric composites containing some crystalline filler particles. Diffraction is found effective in disclosing the distribution of stresses over the surface of adhesively bonded joints in aluminum strips when loads well below the yield point are applied. When two 606l-T6 aluminum strips 1/16" or l/32" thick and 3/4" ...

In this paper, electrochemical behavior of epoxy paints embedded by modified calcium carbonate particles was investigated during exposure to 3.5 wt% NaCl solution. The precipitated calcium carbonate (PCC) and ground calcium carbonate (GCC) particles were utilized as inexpensive filler for epoxy paints. Electrochemical impedance spectroscopy (EIS), polarization tests and pin-on-disk method w...