AlN/epoxy composites with high thermal conductivity were successfully prepared by infiltrating epoxy into AlN porous ceramics which were fabricated by gelcasting of foaming method. The microstructure, mechanical, and thermal properties of the resulting composites were investigated. The compressive strengths of the AlN/epoxy composites were enhanced compared with the pure epoxy. The AlN/epoxy co...

Copyright © Korean Carbon Society http://carbonlett.org Abstract The use of carbon nanotubes (CNTs) as a reinforcing material in a polymer matrix has increased in various industries. In this study, the flexural behavior of CNT-modified epoxy/ basalt (CNT/epoxy/basalt) composites is investigated. The effects of CNT modification with silane on the flexural properties of CNT/epoxy/basalt composite...

The effect of paraffin wax encapsulated microcrystalline cellulose (EMC) particles on the mechanical and physical properties of EMC/epoxy composites were investigated. It was demonstrated that the compatibility between cellulose and epoxy resin could be maintained due to partial encapsulation resulting in an improvement in epoxy composite mechanical properties. This work was unique because it w...

changes in moisture content and temperature can perturb both stiffness and strength and as such the impact resistance of composite structures. in this paper, the pre-notched basalt fibre reinforced epoxy (bfre) composite specimens are studied under charpy impact loads in order to investigate the changes in impact energy absorption (fracture toughness) with different kinds of aging conditions. t...

In this research work, impact strength of untreated, alkali treated, potassium permanganate treated, benzoyl chloride treated and acrylic acid treated areca fiber reinforced epoxy composites were studied under 40%, 50%, 60% and 70% fiber loadings. Impact strength increased with increase in fiber loading up to 60% and then showed a decline for all untreated and chemically treated areca fiber rei...

In this study, epoxy-cubic boron nitride composites are fabricated, and their dielectric response is investigated. They exhibit the same trend as epoxy composites reinforced with other filler types. Thus, at low filler concentrations, they exhibit a lower relative permittivity than neat epoxy. As the fill grade further increases, the relative permittivity of the composites increases as well. It...

This paper presents the synthesis and thermal and mechanical properties of epoxy-titania composites. First, submicron titania particles are prepared via surfactant-free sol-gel method using TiCl₄ as precursor. These particles are subsequently used as inorganic fillers (or reinforcement) for thermally cured epoxy polymers. Epoxy-titania composites are prepared via mechanical mixing of titania pa...

In this research, quasi-static penetration and ballistic properties of non-woven kenaf fibres/Kevlar epoxy hybrid laminates with thicknesses ranging from 3.1 mm to 10.8 mm by hard projectile at normal incidence have been experimentally investigated. Hybrid composites were fabricated by hand lay-up technique in a mould and cured at room temperature for 24 h by static load. Hybrid composites cons...

Epoxy is a versatile resin used in different fields such as coatings, colors, colorants, and composites. Adding nano-scale fillers/additives to the epoxy has valued epoxy coatings for engineering applications, and opened the time of advanced epoxy-based nanocomposite coatings. In the present work, graphene oxide GO was chemically functionalized with starch, as a natural polymer, and added to th...

the creep behavior of basalt fiber reinforced epoxy (bfre) and glass fiber reinforced epoxy (gfre) composites was studied through tensile testing at high temperature. to study the effect of reinforcing epoxy, the micro glass powder (mgp) was added at various volume percentage into the epoxy resin in bfre composites. the initial strain for all the specimens were evaluated and compared with each ...