y-tial intermetallic alloy have a good potential for use as biomaterial, due to its good corrosion resistance. in this paper, two fundamental electrochemical techniques namely electrochemical impedance spectroscopy and potentiodynamic anodic polarization were used to evaluate the corrosion performance of g-tial in ringer's solution. surface modification treatments were employed with the pu...

vanillin is an interesting corrosion inhibitor because of its safe use and high solubility inwater. the effect of vanillin on the corrosion inhibition of carbon steel in 1.0 mhydrochloric acid solution has been studied using potentiodynamic polarization,electrochemical impedance spectroscopy (eis) and electrochemical noise (en) techniques.the effect of temperature on the rate of corrosion in th...

Metallic materials in practical use are normally exposed to corrosion in the atmospheric and aqueous environments. Metallic corrosion is one of the problems we have often encountered in our industrialized society; hence it has been studied comprehensively since the industrial revolution in the late eighteenth century. Modern corrosion science was set off in the early twentieth century with the ...

An effective way of assessing corrosion in pipelines before serious consequences occur is to use tools that can predict the future of a pipeline through an understanding of its present state and the mechanisms of corrosion. In this work electrochemical methods such as liner and tafel polarization resistance were used to evaluate corrosion. Most metal corrosion occurs via electrochemical reactio...

The corrosion behavior of pure Fe under a Na₂SO₄ deposit in an atmosphere of O₂ + H₂O was investigated at 500 °C by thermo gravimetric, and electrochemical measurements, viz. potentiodynamic polarization, electrochemical impedance spectroscopy (EIS), and surface characterization methods viz. X-ray diffraction (XRD), and scanning electron microscope (SEM)/energy dispersive spectroscopy(EDS). The...

aisi 304l austenitic stainless steel with different grain sizes of 0.5 -12 μm was obtained through the martensiticprocess. corrosion behavior of different samples was investigated in a 0.5m hcl solution using open circuitpotential, potentiodynamic polarization and electrochemical impedance spectroscopy tests. also, the correlationbetween the grain size and pitting corrosion resistance was asses...

in this study, the effects of forming method (extrusion) and environmental factors (solution ph and temperature) on the corrosion performance of az91 magnesium alloys were investigated using potentiodynamic polarization, electrochemical impedance spectroscopy (eis), scanning electron microscopy (sem) and salt spray techniques. the polarization test results of the specimens showed that simple sh...

The effect of oil soluble commercial corrosion inhibitors (OSCI) on the growth of bacteria and its corrosion inhibition efficiency were investigated. Corrosion inhibition efficiency was studied by rotating cage test and the nature of biodegradation of corrosion inhibitor was also analyzed by using FTIR, NMR and GC-MS. This isolate has the capacity to degrade the aromatic and aliphatic hydrocarb...

Corrosion inhibition of mild steel was studied using L-Dopa in aqueous hydrochloric acid and sulphuric acid solutions. The corrosion behaviours of the steel specimen in the presence of inhibitor weret studied by galvanostatic polarization and weight loss techniques. The measured electrochemical data indicated good inhibition of corrosion in both the corrosive medium in presence of L-DOPA. The c...

The presented paper studies the effect of the casting technology on the corrosion resistance of Co-Cr-Mo alloy. The investigations were conducted on a commercial alloy with the brand name ARGELOY N.P SPECIAL (Co-Cr-Mo) produced by Argen as well as the same alloy melted and cast by the lost wax casting method performed by a dental technician. The corrosion behavior of the dental alloys in an art...