in this paper, a complete model of an electro hydraulic driven dry clutch along with its performance evaluation has elucidated. through precision modeling, a complete nonlinear physical and full order sketch of clutch has drawn. ultimate nonlinearities existent in the system prohibits it from being controlled by conventional linear control algorithms and to compensate the behavior of the system...

This paper details the new design and dynamic simulation of an electro-hydraulic camless engine valve actuator (EH-CEVA) and experimental verification with lift position sensors. In general, camless engine technologies have been known for improving fuel efficiency, enhancing power output, and reducing emissions of internal combustion engines. Electro-hydraulic valve actuators are used to elimin...

MF Rahmat, S Md Rozali, N Abdul Wahab and Zulfatman Faculty of Electrical Engineering, Universiti Teknologi Malaysia, UTM Skudai 81310, Johor,Malaysia; E-mail : [email protected],[email protected], [email protected] Faculty of Electrical Engineering, Universiti Technical Malaysia Melaka, 76109 Durian Tunggal, Melaka,Malaysia; E-mail : [email protected] Abstract Draw-wire sensor is classified a...

Electro-hydraulic actuators are very important tools for industrial processes because they provide linear movement, fast response and accurate positioning of heavy load. Recently, with the research and development of mathematics, control theory and basic theory of hydraulic, hydraulic control technology has been developed and has been widely used in many applications such as industrial automati...

Linear electro-mechanical actuators are finding increased use in the field of thrust vectoring of launch vehicles. Earlier, linear electro-hydraulic actuators were used especially in the lower stages of the launch vehicles where there is a requirement for large actuation forces. However, electro-mechanical actuators are being scrutinized for this purpose in an effort to provide lighter, cleaner...

For maintenance microrobots for small diameter pipes in power plants and so on, a novel microgripper using divided-electrode type flexible electro-rheological valves (DE-FERVs) was proposed and developed. Each bendable finger consisted of the DE-FERV and a hydraulic rubber actuator and was several millimeters long. The DE-FERV had an axially divided parallel plate electrode pairs in a flexible ...

the technique used to control the airflow is based on the electro-hydrodynamic actuator which is also called plasma actuator. this actuator ensures the airflow control thanks to the electric wind created by the electrical corona discharge. this ionic wind is developed at the profile surface tangential to the initial free airflow so that it has a significant effect on the boundary layer flow. th...

The future More Electric Aircraft (MEA) technology focus on increasing the use of electrical equipment to a larger extent, e.g. replacing conventional hydraulic and pneumatic actuators with electromechanical or electro hydrostatic actuators to reduce weight, cost and maintenance. Advances in enabling technologies of electric power generation, distribution, and utility equipment have made the us...

This paper describes the development of linear parameter varying (LPV) models and an LPV-H∞ controller for one degree of freedom (DoF) electro-hydraulic systems. A virtual set-up consists of a hydraulic actuator driven by a servovalve and supplied from a constant-pressure power unit. The LPV models are derived based on two techniques: black-box modeling and the analytical description of the sys...