One of the key issues associated with using of composites in various applications is their tensile behavior. The tensile behavior of a composite material is strongly influenced by the properties of its constituents and their distribution. This paper focuses on gaining some insights into the tensile process of pure and hybrid woven composite reinforced with brittle and ductile yarns. For this pu...

This article describes design concept and material characteristics of a new ductile fiber reinforced cementitious composite referred to as ECC (Engineered Cementitious Composite). This particular ECC contains Polyvinyl Alcohol fiber and exhibits remarkably ductile tensile property with over 1% of tensile strain capacity. The high tensile strain performance of the ECC was found successfully util...

Accurate constitutive models of the constituent materials in a reinforced concrete (RC) section, namely, unconfined concrete, confined concrete and reinforcing steel are necessary in fiber-based discretization of RC components for use in nonlinear analysis of RC structures. This paper examines the sensitivity to different constitutive models in predicting the inelastic seismic behavior of RC fr...

This paper is a summary report based on the discussion of JCI-DFRCC committee. The paper attempts to summarize the terminologies related to DFRCCs and the structural advantages and application concepts of DFRCCs. The attempt is made for the purpose of further discussion at JCI International Workshop on Ductile Fiber Reinforced Cementitious Composites -Application and Evaluationheld in 2002 at T...

Ductile fiber-reinforced cement-based composites (DFRCCs) are being investigated for new design as well as retrofitting of structures in seismic regions. DFRCC is highly ductile and is characterized by strain-hardening in tension to strains over 3% and by unique cyclic loading behavior. To accurately predict the structural performance of DFRCC components under cyclic and seismic loading, a robu...

A thin layer of ductile fiber-reinforced mortar material referred to as Engineered Cementitious Composites, or ECC has been experimentally investigated as a seismic retrofit for unreinforced masonry infill walls in non-ductile reinforced concrete frames. Compression tests of masonry prisms retrofitted with 13mm of ECC were conducted representing the compression strut of a masonry infill under i...

Predicting the Seismic Behavior of the Dywidag Ductile Connector (DDC) Precast Concrete System Elizabeth Mary Kenyon Structural engineering is heavily dependent on the use of computers. When creating a building model using structural analysis software, it is required that the designer have an understanding of the system behavior and the modeling program capabilities. Some engineers in the South...

The fatigue behavior of the unnotched and notched silicon carbide fiber-reinforced titanium/titanium aluminide hybrid laminated composite was investigated at room temperature. The evolution of microstructural damage and its effect on stiffness and strength degradation was quantified as a function of loading cycles and applied stress levels. Fatigue crack propagation behavior and damage mechanis...

Rate-independent energy dissipation associated with high-strain high-stress behavior of the material is considered. This rate-independent energy dissipation is associated with damage and relative motion inside the fiber-matrix material system. Simple mechanical models for energy dissipation were presented to facilitate the understanding of the phenomena. Three mechanisms for internal energy dis...

The high plasticity of metallic glasses is highly desirable for a wide range of novel engineering applications. However, the physical origin of the ductile/brittle behaviour of metallic glasses with various compositions and thermal histories has not been fully clarified. Here we have found that metallic glasses with compositions at or near intermetallic compounds, in contrast to the ones at or ...