experiments were carried out to observe the influence of loading type on concrete beam specimens. beam specimens made of similar concrete mixture with the same geometry were tested under three point static loading and low velocity drop weight impact loading. load – displacement behavior, absorbed energy dissipation capacity, stiffnesses, failure modes of beam specimens were obtained and discuss...

in this research, softening and ratcheting behaviors of ck20 alloy steel cylindrical shells were studied under displacement-control and force-control cyclic axial loading and the behavior of hysteresis curves of specimens was also investigated. experimental tests were performed by a servo-hydraulic instron 8802 machine. the mechanical properties of specimens were determined according to astm e8...

Direct Displacement-Based Design (DDBD) is a performence-based seismic design method that has been proposed and well developed over the past two decades to design RC frame structures, shear walls and bridges. In this method, the behavior of a multi-degree-of-freedom (MDOF) sysytem is approximaeted by an equivalent single-degree-of-freedom (SDOF) substitute structure. Although this method has be...

elevated tanks are very important structures and consist of various types. water supply is vital to control fires during earthquakes. also they are utilized to store different products, like petroleum supplies in cities and industrial zones. damage to these structures during strong ground motions may lead to fire or other hazardous events. elevated tanks should stay functional after and before ...

elevated tanks are important structures in storing vital products, such as petroleum products for cities and industrial facilities, as well as water storage. these structures have various types and are constructed in a way that a greater portion of their weight is concentrated at an elevation much about the base. damage to these structures during strong ground motions may lead to fire or other ...

In this research, softening and ratcheting behaviors of Ck20 alloy steel cylindrical shells were studied under displacement-control and force-control cyclic axial loading and the behavior of hysteresis curves of specimens was also investigated. Experimental tests were performed by a servo-hydraulic INSTRON 8802 machine. The mechanical properties of specimens were determined according to ASTM E8...

We measured the load-displacement behavior of both single and paired sacroiliac (SI) joints in fresh cadaver specimens obtained from eight adults between the ages of 59 and 74 years. With both ilia fixed, static test loads were applied to the center of the sacrum along and about axes parallel and normal to the superior SI endplate. Test forces up to 294 N were applied in the superior, inferior,...

an attempt has been made to explore the general trends in the seismic response of planasymmetric structures when subjected to near-fault and far-fault ground motions. systems with structural wall elements in both orthogonal directions considering actual and common nonlinear behavior under bi-directional excitation were studied. idealized single-storey models with uni-axial eccentricity were emp...