the mechanical behaviour of rockfill materials and aggregates depends not only on particle size and compaction, but also on their strength and lithological properties. in this research two types of large triaxial and direct shear tests are performed on rockfill materials. this paper compares the stress-strain behaviour of sandstone and andesibasalt materials in triaxial compression tests (3006...

nowadays, soil reinforcement using polymer elements have been investigated by a number of researchers in order to increase the load capacity of soils. reinforcing soils using fibers is a method of soil improvement, which offers a homogenous mixture in combination with soils, regarding their tensile strength. this combination maintains pressure loading capacity and properties in mutual resistant...

in this paper a laboratory study has been carried out on the effect of changing the type of soil filling cylindrical reinforcing elements from sm to gm on behavior of sandy soil. in this study the primary tests for evaluation of the impact of reinforced sand and gravel columns with diameters of 5 cm and heights of 15 cm subjected to vertical stresses of 50, 100, and 150 kpa were carried out in ...

nowadays, soil reinforcement using polymer elements have been investigated by a number of researchers in order to increase the load capacity of soils. reinforcing soils using fibers is a method of soil improvement, which offers a homogenous mixture in combination with soils, regarding their tensile strength. this combination maintains pressure loading capacity and properties in mutual resistant...

large size direct shear tests (i.e.300 x 300mm) were conducted to investigate the interaction between clay reinforced with geogrids embedded in thin layers of sand. test results for the clay, sand, clay-sand, clay-geogrid, sandgeogrid and clay-sand-geogrid are discussed. thin layers of sand including 4, 6, 8, 10, 12 and 14mm were used to increase the interaction between the clay and the geogrid...

due to the existence of fibrous materials such as plastic fragments, the strength anisotropy of municipal solid waste (msw) materials is the main source of differences between their mechanical response in direct shear and triaxial apparatus. as an extension of earlier research on the mechanical behavior of msw using a large traixail apparatus, results presented in shariatmadari et al. [1] and k...

The effect of particle size on shear strength of granular materials are investigated using direct shear tests. Small direct shear test (60 mm by 60 mm by 24 mm deep) were conducted for particles passing the sieves with opening size of 2.36 mm. Meanwhile, particles passing the standard 20 mm sieves were tested using large direct shear test (300 mm by 300 mm by 200 mm deep). The large direct shea...

 In pavement design, the CBR and direct shear tests are two very common laboratory investigations for predicting the strength of a subgrade layer. The relationship between the CBR and water content has been commonly presented in analyses, with the result of the direct shear being expressed from the aspect of effective cohesion and the internal friction angle. Even though most natural soil is in...