In this article various pipes used for transporting of gas are introduced and pros and cons of each one are elucidated. The pipes are categorized in three different subgroups including metallic, polymeric and metallic-wire reinforced polymeric pipes. Metallic-wire reinforced polymeric pipes are nominated as the best option for usage in high pressure pipelines transporting natural gas. As a resu...

The safety of lifelines, as the most important urban facilities, under different conditions highly depends on the safe design and performance of these buried structures. This cannot be achieved unless their actual behaviors are well understood and considered at the designing stage. A new physical model was developed in Amirkabir University of Technology to study the behavior of buried pipes und...

The results of a metallographic study of grey cast iron water pipes are reported. These pipes had been installed between 1885 and 1973 in eight different water systems. Each pipe had been extracted during scheduled maintenance or failure repairs to provide data for a larger study to produce a methodology for determining the residual life of grey cast iron pipes. This metallographic study was co...

Abstract: In this paper we extend the theory of Radio Frequency (RF) propagation as it relates to propagation within metal circular pipes. This work is motivated by a need to understand the operation of UHF Radio Frequency IDentification (RFID) systems when the tags are placed within the pipes. These circular pipes are shown to be similar to metal tube waveguides which are hollow. We derive the...

Pollutants discharged from stormwater pipes can cause water quality and ecosystem problems in coastal bayous. A study was conducted to characterize sediment and nutrients discharged by small and large (< 20 cm and >20 cm in internal diameters, respectively) pipes under different rainfall intensities (< 2.54 cm and > 2.54 cm, respectively). Results showed that large pipes had greater discharge t...

Dynamic analysis of supported pipes conveying pulsating fluid is investigated in Hamiltonian system using precise integration method PIM . First, symplectic canonical equations of supported pipes are deduced with state variable vectors composed of displacement and momentum. Then, PIM with linear interpolation formula is proposed to solve these equations. Finally, this approach’s precision is te...

This paper presents the architecture used to develop a micro-robot for narrow pipes inspection. Both the electromechanical design and the control scheme will be described. In pipe environments it is very useful to have a method to retrieve information of the state of the inside part of the pipes in order to detect damages, breaks and holes. Due to the different types of pipes that exists, a mod...

Free-reed organ pipes were introduced at the end of the 18 century and soon became popular across Europe, especially in Germany and Switzerland. As opposed to striking-reed pipes (boundor beating-reed pipes) the reed in free-reed pipes does not beat against the shallot, an orifice in the reed, when it is played. Instead it swings freely through a perforated rectangular plate of brass, like in r...

Climate change occasioned by the accumulation of greenhouse gases (GHGs) is now widely accepted as an issue which mankind needs to address. The starting point is necessarily the determination of all the sources of emissions during the life-cycles of the studied components. Post-calculation, the results ought to be presented to decision-makers in a clear manner so as to provide the basis on whic...

In this paper, a stochastic finite element method (SFEM) is employed to investigate the probability of failure of cementitious buried sewer pipes subjected to combined effect of corrosion and stresses. A non-linear time-dependant model is used to determine the extent of concrete corrosion. Using the SFEM, the effects of different random variables, including loads, pipe material, and corrosion o...