The co-processing of an unconventional type of Jatropha bio-oil with petroleum distillates over mesoporous alumina-supported CoMo and NiMo sulfide catalysts (denoted CoMo/γ-Al2O3 and NiMo/γ-Al2O3) was studied. Either a stainless-steel high-pressure batch-type reactor or an up-flow fixed-bed reaction system was used under severe reaction conditions (330–350 ◦C and 5–7 MPa), similar to the condit...

INTRODUCTION The increasing demand for diesel fuels has resulted in the use of greater percentage of cracked distillates having poor ignition properties. The ignition properties of diesel fuels can be rated in terms of their cetane number and diesel fuels having low cetane number may have poor ignition properties such as diesel knock, difficulties to start engines in the cold weather and so on....

The present study describes the application of Fischer Tropsch biowaxes as a feedstock in a pilot-scale hydroprocessing unit at operating conditions very similar to industrial size hydrotreating plants of traditional refineries. The project focus on a future coprocessing of biowax/gasoil blends due to produce bio-products derived from lignocellulosic biomass: crack gases, naphtha, kerosene, die...

the oil refining industries are using a number of demulsifiers for dewatering and desalination of crude oil but experience has shown that universal demulsifiers can not be produced. each kind of water in oil (w/o) emulsion requires specific by composition demulsifier. in practice, synergetic effect of the interaction between different types of demulsifiers is often sought. for dewatering the w...

The performance of diesel fuel is predominantly determined by its ignition quality. This parameter is known as the Cetane number. The Cetane number describes the volume % Cetane (hexadecane) present in a mixture of Cetane and 1-Methylnaphthalene. Generally, in order to provide the best performance and lifetime of an engine, the amount of aromatics in diesel should be as low as possible. For the...

There is a need for reliable and fast means of monitoring refining, conversion, and upgrading processes aiming to increase the yield of light distillates, and thus, reducing the oil barrel bottoms. By simultaneously utilizing the FID and mass selective detectors while splitting the column effluent in a controlled way, it is possible to obtain identical gas chromatograms and total ion chromatogr...

Biocrude oil from hydrothermal liquefaction (HTL) demonstrates promise as a supplement to the transportation fuel supply. However, its poor chemical (heteroatom content, energy content), physical (viscosity, density), and thermal (boiling point distribution, cetane value, cold-flow properties) characteristics limit commercial application. This study investigated potential for biocrude distillat...

ABSTRACT Background: Herbal distillates have been used for many centuries as drinks, flavors, and herbal medicine in Iran, especially in the city of Urmia. Recently, some studies claimed the presence of methanol in different types of herbal distillates. Methanol is a highly toxic compound which can cause acute or chronic toxicity in humans. Acute poisoning with methanol can cause different co...

Development of local technologies is crucial to the sustainable energy agenda in resource-limited countries and world. Strengthening green promoting utilization will reduce carbon emissions that could be generated during transportation delivery products from one country another. In this paper we developed bio-oil/diesel blends using a low-tech pyrolysis system designed for smallholder farmers d...