introduction: the aim of this study was to evaluate the effect of bridge orientation in casting machine on castability and quality of base metal castings. methods: three groups of patterns with different direction and lengths in casting machine were casted and then studied qualitatively and quantitatively using mean and standard deviation in table of frequency. results: larger nodules and poros...

Introduction: The aim of this study was to evaluate the effect of bridge orientation in casting machine on castability and quality of base metal castings. Methods: Three groups of patterns with different direction and lengths in casting machine were casted and then studied qualitatively and quantitatively using mean and standard deviation in table of frequency. Results: Larger nodules and poros...

The purpose of this study was to use a tape casting technique to develop an Al2O3 fiber-reinforced Al2O3-based ceramic material (Al2O3-fiber/Al2O3 composite) into a new type of dental ceramic. The Al2O3-based ceramic used a matrix consisting of 60 wt% Al2O3 powder and 40 wt% SiO2-B2O3 powder. The prepreg sheets of Al2O3-fiber/Al2O3 composite (in which uniaxially aligned Al2O3 fibers were infilt...

PURPOSE The aim of the present study was to record the metal-ceramic bond strength of a feldspathic dental porcelain and a Co-Cr alloy, using the Direct Metal Laser Sintering technique (DMLS) for the fabrication of metal substrates. MATERIALS AND METHODS Ten metal substrates were fabricated with powder of a dental Co-Cr alloy using DMLS technique (test group) in dimensions according to ISO 96...

In dentistry, gold-based noble metal alloys have traditionally been cast into various types of dental prostheses, such as partial dentures, crowns, and bridges. More recently, less expensive dental alloys with base-metal elements, such as Co-Cr and Ni-Cr, have been used. Titanium is considered to be an attractive alternative to these traditional dental alloys because of its remarkable lack of t...

The casting of cobalt-base alloys in dentistry is comparatively new in relation to the casting of gold alloys and other restorative procedures. It has been less than thirty years since these alloys were introduced to dentistry, but each year they have become more popular. A survey of the choice of dental alloys for removable partial dentures conducted by Lane' in 1949 showed that five times as ...

Casting failures of alloys in dental technology should be the exception, not the rule. They have to be detected in time and associated with possible causes. For the experimental part base metal alloys single tooth restorations were achieved using the conventional lost wax process for casting in order to be evaluated. Some casting defects obtained during the experimental part are exemplified: in...

Ceramo-metal dental casting alloys are used for crowns and fixed partial dentures (bridges). Ni-Cr and Co-Cr are base ceramo-metal dental casting alloys and now account for the majority of the fixed metalceramic restorations used clinically. The corrosion of these alloys result in release of elemental components with potential adverse biological reactions. It is of great importance to investiga...