Forward osmosis (FO) has recently drawn attention as a promising membrane based method for seawater and brackish water desalination. In this study, we focus on the use of calciun chloride (CaCl2) and potassium bicarbonate (KHCO3) as inorganic salt draw solution candidates due to their appropriate performance in water flux and reverse salt diffusion as well as reasonable cost. The experiments we...

forward osmosis (fo) has recently drawn attention as a promising membrane based method for seawater and brackish water desalination. in this study, we focus on the use of calciun chloride (cacl2) and potassium bicarbonate (khco3) as inorganic salt draw solution candidates due to their appropriate performance in water flux and reverse salt diffusion as well as reasonable cost. the experiments we...

Modified cellulose acetate (CA) membranes were prepared by dissolving the polymers in a mixture of acetone (AC) and N, N dimethylacetamide (DMAc) (70:30) solvent and deionized (DI) water was used in the coagulation bath. The introduction of polyethylene glycol (PEG) additive and TiO2 nanoparticles (NPs) into the casting solution has changed the structures of the resulting membranes during the p...

modified cellulose acetate (ca) membranes were prepared by dissolving the polymers in a mixture of acetone (ac) and n, n dimethylacetamide (dmac) (70:30) solvent and deionized (di) water was used in the coagulation bath. the introduction of polyethylene glycol (peg) additive and tio2 nanoparticles (nps) into the casting solution has changed the structures of the resulting membranes during the p...

In this work, polyvinylchloride (PVC) membrane prepared via casting solution technique and phase inversion method. N, N dimethylacetamide (DMAC) was used as primary solvent and Tetrahydrofuran (THF) was used as a co-solvent. The effects of parameters such as membrane thickness, evaporation time of casting film before immersion precipitation and addition of polyethylenglchol (PEG) on PVC membran...

The performance of a single spray for electronic power devices using deionized (DI) water and pure silver (Ag) particles as well as multi-walled carbon nanotube (MCNT) particles, respectively, is studied herein. The tests are performed with a flat horizontal heated surface using a nozzle diameter of 0.5 mm with a definite nozzle-to-target surface distance of 25 mm. The effects of nanoparticle v...

the electro discharge machining (edm), one of the methods used in the machining industry and a non-traditional manufacturing method, the electro erosion process does not depend on the hardness of material and offers a way to process materials of very complex geometry with very fine and high precision by using cheap electrode materials, which make it a preferred method. in this study, effect of ...

The results of investigations of flux decline during nanofiltration (NF) of lactic acid solutions using dynamically formed zirconium(IV) hydrous oxide/polyacrylate membranes (Zr(IV)/PAA) under conditions resulting in low and high lactic acid rejection are reported. The experimental permeate flux versus time curves were analyzed in the frame of resistance in a series model with the aim of develo...

Biofouling of nanofiltration (NF) and reverse osmosis (RO) membranes for water treatment has been the subject of increased research effort in recent years. A prerequisite for undertaking fundamental experimental investigation on NF and RO processes is a procedure called compaction. This involves an initial phase of clean water permeation at high pressures until a stable permeate flux is reached...

introduction : solubility of root filling materials is heavily influenced by the environment they are in contact with. this study compared the solubility of proroot mta in deionized water and synthetic tissue fluid. materials & methods: forty specimens of prepared mta were immersed in deionized water and synthetic tissue fluid (20 samples each). the solubility was assessed after 7 and 28 days. ...