Embryogenesis, regeneration and cell differentiation in microbiological entities are influenced by mechanical forces. Therefore, development of mechanical properties of these materials is important. Neural network technique is a useful method which can be used to obtain cell deformation by the means of force-geometric deformation data or vice versa. Prior to insertion in the needle injection pr...

the effect of axial deformation of shell particles on the dynamic instability (flutter) of cantilevered cylindrical shells made of functionally graded materials (fgm) under an end axial follower force is addressed. to this end, at first, results for free vibration of fgm cylindrical shells were verified with previous outcomes and they were in very good agreement. then, the effect of axial defor...

Under mechanical loading, most living cells show a viscoelastic deformation that follows a power law in time. After removal of the mechanical load, the cell shape recovers only incompletely to its original undeformed configuration. Here, we show that incomplete shape recovery is due to an additive plastic deformation that displays the same power-law dynamics as the fully reversible viscoelastic...

The quasi-static and dynamic compressive behavior of open-cell foams, textile cores, and pyramidal truss cores were investigated using a combination of experimental apparatus. Quasi-static tests were performed using a miniature loading stage and a Kolsky bar apparatus was used for intermediate deformation rates. For high deformation rates, a gas gun was employed. Optical observations of the sam...

Wepresent experimental results of large deformation of human red blood cells subjected to direct stretching by optical tweezers. The maximum external force imposed on the cell is in excess of 400 pN.A three-dimensional computational simulation of the biconcave cell membrane is also performed to extract the large deformation elastic properties from the experimental results obtained during loadin...

Analysis of reciprocating equipment piston rod leads to nonlinear elastic-plastic deformation analysis of rod with initial imperfection under axial dynamic load. In this paper a new and effective model and analytical formulations are presented to evaluate dynamic deformation and elastic-plastic stresses of reciprocating machine piston rod. This new method has capability to account for geometric...

Parallel tubular channel angular pressing (PTCAP) process is a novel recently developed severe plastic deformation technique for fabrication of ultrafine grained (UFG) metallic tubes. This new process consists of two half cycles and is affected by several parameters such as channel angles, deformation ratio and curvature angles. In this paper, the effects of these parameters on the plastic defo...

Forming limit diagrams (FLDs) are calculated based on both the Marciniak and Kuczynski (M-K)  model and the analysis proposed by Jones and Gillis (J-G). J-G analysis consisted of plastic deformation approximation by three deformation phases. These phases consisted of homogeneous deformation up to the maximum load (Phase I), deformation localization under constant load (phase II) and local necki...

in this paper, a new approach to modify cable tension measuring mechanism is described; furthermore, the constructed boards which amplify load cell output are introduced. this approach has some advantages including of providing feedback for motors, evaluating the robot’s ultimate load carrying capacity, improving the motor control system and estimating the vibrating deflections of the end effec...

rndetermination of rock mass deformation modulus is very important in different projects, especially in civil and mining engineering works. in-situ measurements such as dilatometer, plate load and flat jack methods may be applied to determine the deformation modulus. however, these methods are very expensive and time- consuming. analytical methods are very useful approaches which can also be us...