This paper details an experimental investigation of the clamping effect associated with thick-film piezoelectric elements printed on a substrate. The clamping effect reduces the measured piezoelectric coefficient, d33, of the film. This reduction is due to the influence of the d31 component in the film when a deformation of the structure occurs, by either the direct or indirect piezoelectric ef...

In this paper, the piezoelectric coefficient d33 of AlN thin films for MEMS applications was studied by the piezoresponse force microscopy (PFM) measurement and finite element method (FEM) simulation. Both the sample without a top electrode and another with a top electrode were measured by PFM to characterize the piezoelectric property effectively. To obtain the numerical solution, an equivalen...

A series of high-quality, large-sized (maximum size of 16 × 16 × 32 mm(3)) K1-xNaxTa1-yNbyO3 (x = 0.61, 0.64, and 0.70 and corresponding y = 0.58, 0.60, and 0.63) single crystals were grown using the top-seed solution growth method. The segregation of the crystals, which allowed for precise control of the individual components of the crystals during growth, was investigated. The obtained crysta...

Three kinds of fiber reinforced plastic (FRP) composites, including modified polyurethane resin (LGD), epoxy resin (E44) and modified unsaturated polyester resin (D33) glass-fiber reinforced plastics, were subjected to a 5000 h multi-factor accelerated aging test according to the power industry standard. To examine aging resistance and thermal stability of transmission towers made by these thre...

In piezoceramics, the Curie temperature (TC) and piezoelectric coefficient (d33) are often inversely proportional, so it is very difficult to optimize high piezoelectricity TC simultaneously. addition, temperature-insensitive strain (d33*) with small hysteresis also a longstanding obstacle in development of lead-free ceramics. this work, facile approach donor doping strategy adopted replace Ba2...

AIM To determine which, if any, of five commercially available desmin clones is most reliable at labelling desmin filaments and whether the enhanced polymer one step (EPOS) method of labelling is of any advantage in the routine diagnostic laboratory. METHODS Thirty four rhabdomyosarcomas from the files at The Hospital for Sick Children, Great Ormond Street, London, were studied. Four differen...

Molecular piezoelectrics are highly desirable for their easy and environment-friendly processing, light weight, low processing temperature, and mechanical flexibility. However, although 136 years have passed since the discovery in 1880 of the piezoelectric effect, molecular piezoelectrics with a piezoelectric coefficient d33 comparable with piezoceramics such as barium titanate (BTO; ~190 picoc...

Solid solutions of (1-x)BiFeO₃-xBaTiO₃ (BF-BT, 0.05 ≤ x ≤ 0.98) were prepared and characterized. It was found that the dielectric constant εm, remnant polarization Pr and piezoelectric coefficient d33 reach their maximum values near the rhombohedral-pseudocubic phase boundary. In particular, the 0.7BF-0.3BT composition shows large polarization (Pr > 20 μC/cm²) and a temperature-stable piezoelec...

This paper reports the ANSYS simulation and fabrication processes for optimising PDMS ferroelectret performance. The proposed model extends the previously published analytical models and combines this with simulation of individual void geometry. The ferroelectret material is fabricated from PDMS using 3D-printed plastic mould. Mathematic model and Ansys simulation results predict that the perfo...

In this work, the impacts of varying surface modification, matrix parameters, and fabrication conditions on the performance of optically printed (0-3) piezoelectric polymer nanocomposites are examined. For example, we find that a 75% reduction in nanoparticle edge-length boosted the piezoelectric coefficient (d33) by over 100%. By optimizing the composition and fabrication conditions, 10% by ma...