with the expanding demand on application of magnesium alloys in automotive and aerospace industries, robust methods in fatigue characterization of commercially available magnesium alloys with high specific strength is anticipated. in this paper, rotating bending load controlled tests has been studied on specimens machined from an extrusion piece of az31b. due to asymmetric and anisotropic behav...

With the expanding demand on application of magnesium alloys in automotive and aerospace industries, robust methods in fatigue characterization of commercially available magnesium alloys with high specific strength is anticipated. In this paper, rotating bending load controlled tests has been studied on specimens machined from an extrusion piece of AZ31B. Due to asymmetric and anisotropic behav...

abstract: this paper presents the results of pullout tests on uniaxial geogrid embedded in silica sand under monotonic and cyclic pullout forces. the new testing device as a recently developed automated pullout test device for soil-geogrid strength and deformation behavior investigation is capable of applying load/displacement controlled monotonic/cyclic forces at different rates/frequencies an...

introduction: endothelial cells are subjected to mechanical forces caused by pulsatile flow and pressure leading to hemodynamic shear stress and circumferential stress on endothelial layer. the study aimed at a quantitative evaluation of endothelial cell morphology by application of cyclic loading. endothelial cells respond to applied loads with adaptation and remodeling. such mechanisms are ma...

an irreversible stirling heat pump cycle using ferromagnetic materials as a cyclic working substance is established. the influences of finite-rate heat transfer, heat leak, regeneration time, regenerative lossand the internal irreversibility on the cyclic performance of magnetic heat pumps are taken into account. on the basis of the thermodynamic properties of ferromagnetic materials, the perfo...

this paper describes a series of laboratory model tests on strip footings supported on unreinforced and geogrid-reinforced sand with an inside void. the footing is subjected to a combination of static and cyclic loading. the influence of various parameters including the embedment depth of the void, the number of reinforcement layers, and the amplitude of cyclic load were studied. the results sh...

This study is to evaluate the behavior of integral and segmental specimens through static and cyclic tests. Integral specimens were made with the same size to be compared with segmental specimens that were made by connected precast members. To evaluate its bending performance and serviceability, 1 integral and 3 segmental specimens were tested under static load. And 1 integral and 2 segmental s...

Vertical drains and stone columns which have been used in infrastructure construction for highways, ports, coastal regions, etc., provide significant benefits for improving soil characteristics such as reducing the drainage length and accelerating the consolidation process. So the investigation of the radial consolidation is inevitable. Soils may be subjected to cyclic loading such as silos, ta...

several relationships to assess at-rest pressure coefficient in retaining walls, have been developed by different researchers. these suggested relationships are generally a function of mechanical soil parameters such as internal friction angel, poison ratio and over-consolidation ratio. in integral bridges, however, this coefficient is also a function of many other parameters other than soil ch...