In this article, free vibration analysis of variable stiffness composite laminate (VSCL) plates with flat and folded shapes is studied. In order to consider the concept of variable stiffness, in each layer of these composite laminated plates, the curvilinear fibers are used instead of straight fibers. The analysis is based on a semi-analytical finite strip method which follows classical laminat...

A NURBS-based isogeometric finite element formulation is developed and adopted to the free vibration analysis of finite square and skew laminated plates. Variable stiffness plies are assumed due to implementation of curvilinear fiberreinforcements. It is assumed due to employment of tow placement technology, in each ply of variable stiffness composite laminated plate the fiber reinforceme...

A hybrid composite architecture of carbon nanotubes (CNTs), advanced fibers and a matrix is described, from CNT synthesis and characterization through to standard mechanical and electrical laminate tests. Direct growth of aligned CNTs on the surface of advanced fibers in a woven fabric enables enhancement in multifunctional laminate performance, as demonstrated by a 69% increase in interlaminar...

In this research, effect of opening on the buckling of FMLs (Fiber Metal Laminate) is studied. Samples are made of a laminate, epoxy resin reinforced with four layers of woven basalt fibers, inserted between two Al plates. Different samples are prepared, tested and studied; one group without opening and the other two groups with circular openings of radii 10 and 20 mm. In all samples buckling i...

The present work study flexural and tensile behavior of short Kenaf fiber reinforced composites. The fibers are chemically treated in 2% NaOH solution at room temperature. Short fibers of 4mm and 8 mm are used in the present work. The composite lamina is prepared by hand molding using isopthalic polyester resin. Flexural test and tension tests are carried out as per ASTM standards. The flexural...

This paper deals with the development of a numerical simulation methodology for estimating damages in laminate composite materials caused by a low-speed impact. Experimental tests were performed on laminate plates reinforced with woven carbon fibers and epoxy resin. Three thickness plates were evaluated. The impact loads were transversal and punctual. Two lamina failure criteria were evaluated....

Fiber structures, yarn structures, and mechanical properties of fibers namely tensile modulus, tenacity, and elongation, are the key performance indicators of fabric cut resistance. p-aramid and UHDPE (Ultra High Density Polyethylene) based high performance fibers are most commonly used for protection against mechanical risks. Specially engineered composite yarns and fabrics enhance cut resista...

The penetration of a 30CrMnMo ultra-high molecular weight polyethylene armor by a high-speed fragment was investigated via experiments and simulations. Analysis of the projectile revealed that the nose (of the projectile) is in the non-equilibrium state at the initial stage of penetration, and the low-speed regions undergo plastic deformation. Subsequently, the nose-tail velocities of the proje...