Copper, zinc, and cerium oxide adsorbents supported on alumina were used to remove silane gas (SiH4). The adsorbents were prepared using a coprecipitation method and characterized by the inductively coupled plasma mass spectrometry, X-ray powder diffractometer, and Brunauer-Emmett-Teller method (BET). The silane removal efficiency and adsorption capacity of the adsorbents were investigated in t...

a series of cuo-zno-al2o3 nanoparticles over hzsm-5 were successfully prepared using different methods of batch co-precipitation, semibatch co-precipitation and combined co-precipitation-ultrasound. nitrates of copper, zinc and aluminum were used as precursors, while na-zsm-5 was employed as composite support and sodium carbonate was used as precipitant agent. the effects of preparation methods...

A short time (3-10 min) of microwave irradiation on the CuO/ZnO/Al2O3 oxide precursor can result in a unique tailored microstructural modification on the catalyst, leading to a significantly enhanced performance for H2 production from steam reforming of methanol.

A series of CuO-ZnO-Al2O3 nanoparticles over HZSM-5 were successfully prepared using different methods of batch co-precipitation, semibatch co-precipitation and combined co-precipitation-ultrasound. Nitrates of copper, zinc and aluminum were used as precursors, while Na-ZSM-5 was employed as composite support and sodium carbonate was used as precipitant agent. The effects of preparation methods...

A chiral ionic liquid with a natural alcohol based chain was used as a tailoring agent for the synthesis of simple and cost effective materials such as ZnO, CuO, CuO–ZnO with peculiar morphology. The morphology and chemical composition of the microstructures were investigated by bright-field and scanning transmission microscopy (BF-TEM and STEM), energy dispersive X-ray spectroscopy (EDX), Four...

The oxidation of phenol solutions (5 g/L) has been studied in a semibatch autoclave reactor. Activity screening experiments were performed over two commercial catalysts: CuO+ZnO (Topsoe) and CuO+NiO (Engelhard), and CuO/Al2O3 prepared in our laboratory. Isothermal runs between 393 and 423 K were carried out under an oxygen pressure of 7 bar. Phenol conversion as well as pH and Chemical Oxygen D...

Three-dimensional (3D) porous ZnO-CuO hierarchical nanocomposites (HNCs) nonenzymatic glucose electrodes with different thicknesses were fabricated by coelectrospinning and compared with 3D mixed ZnO/CuO nanowires (NWs) and pure CuO NWs electrodes. The structural characterization revealed that the ZnO-CuO HNCs were composed of the ZnO and CuO mixed NWs trunk (~200 nm), whose outer surface was a...

ZnO-CuO nanocomposite thin films were prepared by carbothermal evaporation of ZnO and Cu, combined with annealing. The effects of 90 MeV Ni(7+) ion irradiation on the structural and optical properties of ZnO-CuO nanocomposites were studied by using X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), UV-visible absorption spectroscopy and Raman spectroscopy. XRD studies...