in this research zinc oxide (zno) nano-crystalline powders were prepared by sol-gel method using zinc acetate. the zno nanoparticles were characterized by x-ray diffraction (xrd), scanning electron microscopy (sem), ultraviolet-visible (uv-vis), fourier transform infra-red (ft-ir) and energy dispersive x-ray (edx) spectroscopy. the structure of nanoparticles was studied using xrd pattern. the c...

ZnO columnar single crystals were formed by pulsed laser ablation in deionized water and surfactant aqueous solutions of lauryl dimethylaminoacetic acid (LDA) and cetyltrimethylammonium bromide (CTAB) at 80 degrees C. ZnO particles produced by laser ablation were dissolved at a higher temperature than 60 degrees C, and then crystalline growth to columnar structure proceeded. While large ZnO col...

In this research, nanoimprint lithography (NIL) was used for patterning crystalline zinc oxide (ZnO) nanorods on the silicon substrate. To fabricate nano-patterned ZnO nanorods, patterning of an n-octadecyltrichlorosilane (OTS) self-assembled monolayers (SAMs) on SiO2 substrate was prepared by the polymer mask using NI. The ZnO seed layer was selectively coated only on the hydrophilic SiO2 surf...

We demonstrate a new approach for synthesizing Ag-ZnO heterogeneous nanostructures in which single-crystalline ZnO nanorods were selectively grown on {111} rather than {100} facets of single-crystalline Ag truncated nanocubes. We have identified the fine structure of the Ag-ZnO heterostructures and proposed a mechanism indicating that structure match plays a critically important role in this ty...

We report on the development of Ni-shielded ZnO nanorod (NR) structures and the impact of the Ni layer on the ZnO NR properties. We developed nickel-capped zinc oxide nanorod (ZnO/Ni NR) structures by e-beam evaporation of Ni and the subsequent annealing of the ZnO/Ni core/shell nanostructures. The core/shell NRs annealed at 400 °C showed superior crystalline and emission properties. More inter...

Zinc oxide (ZnO) nanocrystals (NCs) with high crystalline quality were prepared via radio-frequency magnetron sputtering as a SiO(2)/ZnO/SiO(2) trilayer on Si(100) and Al(2)O(3)(0001) substrates with an intermediate in situ annealing step. Transmission electron microscopy reveals a uniform dispersion of ZnO NCs in the amorphous SiO(2) matrix with typical sizes up to 16 nm with a larger fraction...

The interface between photoactive biological materials with two distinct semiconducting electrodes is challenging both to develop and analyze. Building off of our previous work using films of photosystem I (PSI) on p-doped silicon, we have deposited a crystalline zinc oxide (ZnO) anode using confined-plume chemical deposition (CPCD). We demonstrate the ability of CPCD to deposit crystalline ZnO...

zno and mn-zno nano powders were prepared by the sol-gel auto combustion method. the products were characterized by x-ray diffraction (xrd), energy dispersive analysis of x-ray (edx) and scanning electron microscopy (sem). structural and morphological properties of nano particles were investigated and the average crystalline size of zno and mn-doped zno was obtained 44 and 51 nm, respectively. ...

Synthesis of ZnO/ZnS heterostructures under thermodynamic conditions generally results in the wurtzite (WZ) structure of the ZnS component because its WZ phase is thermodynamically more stable than its zinc blende (ZB) phase. In this report, we demonstrate for the first time the preparation of ZnO/ZnS coaxial nanocables composed of single crystalline ZB structured ZnS epitaxially grown on WZ Zn...

We demonstrate nonvolatile resistive switching in single crystalline ZnO nanowires with high ON/OFF ratios and low threshold voltages. Unlike the mechanism of continuous metal filament formation along grain boundaries in polycrystalline films, the resistive switching in single crystalline ZnO nanowires is speculated to be induced by the formation of a metal island chain on the nanowire surface....