in this paper, the mean value of strain energy density criterion has been used to predict the critical fracture load in specimens with u-shaped notch under bending loads. an equation for calculation of averaged strain energy density in this zone has been presented. bending loads under mode i have been considered. two cases have been studied: 1) the control volume only includes the semicircular ...

Fracture assessment of U- and V-notches is important in mechanical engineering. One can use the J-integral as fracture parameter in order to predict the critical fracture load in notches. The critical value of the J-integral in cracks is a function of the material properties. In notches, however, the material properties as well as the notch dimensions affect this critical value (named fracture ...

The fracture and crack growth of mechanical structures is a usual phenomenon which is due to the application of tensile, cyclic loading or thermal stresses on the structure. So introducing of methods to prevent the crack growth is useful. Afterward, one of the repairing methods of crack growth, consisting to make a hole in the crack tip to elimi-nate the sharp corners, was explained. This metho...

For the past decades researchers are showing immense interest to investigate the natural advantage of preparation of composites from minerals such as bauxite particles, and proved their effectiveness as cost effective reinforcing agents in fabrication of high performance composites. This study, is a new attempt in using the Iraqi natural bauxite powder with different proportions (2wt%, 4wt%, an...

Bioglass-graphene oxide composites can be served as a high-potential candidate for biomedical applications due to its specific mechanical properties. In this study, the 45S5 bioactive glass (BG) - graphene oxide (GO) composite containing 2 wt. % GO was coated on titanium alloy via electrophoretic deposition process (EPD). The synthesized GO was incorporated into BG coating to improve the mechan...

fracture of mixed mode i/ii in beech wood and its wood polymers has been investigated experimentally in this study. hence, two crack systems of tl and rl were selected in which the crack planes extend along the wood fibers. this investigation has demonstrated that onset of mixed mode cracking can be predicted with a very simple fracture criterion in these crack systems. results indicated that f...

An observed minimum in the critical crack initiation load at Poisson’s ratio (ν) of 0.21–0.22 in Na2O–TiO2–SiO2 glasses was investigated. Vickers indentation was used to examine hardness and average cracking length, fracture toughness was measured through the single-edge pre-cracked beam method, and volumes of densification and shear flow around indents were measured using atomic force microsco...

Rapid advances are taking place to develop hydrogels of high stretchability and toughness, but fatigue fracture has not been studied for any hydrogels. This negligence hinders the development of hydrogels and their applications. Herewe initiate a study of fatigue fracture of hydrogels.We choose polyacrylamide hydrogel as a model material. To place fatigue fracture in context, we apply monotonic...

background: fracture load of implant-supported restorations is an important factor in clinical success. this study evaluated the effect of two techniques for screw access hole preparation on the fracture load of cement-screw retained implant-supported zirconia-based crowns. methods: thirty similar cement-screw retained implant-supported zirconia-based maxillary central incisor crowns were evalu...

in recent years, the application of composite materials in aircraft and space vehicle structural components has become increasingly popular. preventing failure of composite structural systems has been an important issue in engineering design. due to the lack of through-the-thickness reinforcement, structures made from laminated composite materials and adhesively bonded joints are highly suscept...