During the recent decades, the design and construction of underground spaces into rock salt have been particularly regarded for storing petroleum fluids, natural gas, and compressed air energy, and also for disposing nuclear and chemical wastes. The rock salt hosting such spaces will be subjected to various types of monotonic/cyclic, short-term/long-term stresses during the construction and/or ...

Background—The creep-fatigue properties of stainless steel 316 are of interest because of the wide use of this material in demanding service environments, such as the nuclear industry. Need—A number of models exist to describe creep-fatigue behaviours, but they are limited by the need to obtain specialized coefficients from a large number of experiments, which are time-consuming and expensive. ...

SUMMARY c The concept that creep response is the result of a transient approach to a minimum strain rate continuously modified by accumulating damage has been investigated using high precision creep data. It was considered that the accumulated creep strain might be some measure of internal damage and curves of log creep strain rate against creep strain are shown to exhibit linearity at higher s...

the changes in viscoelastic properties of potatoes (tubuls agria) stored at 4 ˚c for 4 months were modeled and evaluated by using the creep-recovery test. cylindrical specimens with 15 mm in diameter and 35 mm long were used. the samples were allowed to deform gradually under the constant stress (110 kpa) for about 30 min. after removing the load, the sample recovery was registered. deformation...

The influence of anisotropic diffusion coefficients on diffusion-controlled high-temperature creep is examined. Anisotropic diffusion affects anisotropy of diffusion-controlled deformation of a single crystal. The shape change of a single crystal by diffusional mass flux is controlled directly by the anisotropy in diffusion coefficients. The rate of shape change of a single crystal by diffusion...

At the microand nanoscale, the standard continuity boundary conditions at fluid–solid interfaces of classical transport phenomena do not apply and must be replaced by boundary conditions that allow discontinuities. In this study, the classical thermal laminar boundary layer equations are studied using Lie symmetries with the no-slip boundary condition for tangential velocity and continuous temp...

[1] We show that realistic aftershock sequences with space-time characteristics compatible with observations are generated by a model consisting of brittle fault segments separated by creeping zones. The dynamics of the brittle regions is governed by static/kinetic friction, 3D elastic stress transfer and small creep deformation. The creeping parts are characterized by high ongoing creep veloci...

In this paper, we describe an experimental study of concrete behavior under a uniaxial tensile load by use of the thermally-compensated Coda Wave Interferometry (CWI) analysis. Under laboratory conditions, uniaxial tensile load cycles are imposed on a cylindrical concrete specimen, with continuous ultrasonic measurements being recorded within the scope of bias control protocols. A thermally-com...

the creep/recovery behavior of wood flour-polypropylene was compared with medium density fiberboard (mdf) and particleboard. for this purpose, wood flour-polypropylene composites (with and without compatibilizer)were manufactured by using a laboratory twin-screw extruder. the mdf and particleboard panels were obtained from local producers. short term flexural creep tests at 30% of ultimate bend...

the effect of impact modifier on creep behavior of wood flour- recycled polypropylene composites has been evaluated in this work. for this purpose, impact modifier (ethylene vinyl acetate) and recycled polypropylene were mixed with wood flour (50/50% w/w) as well as the impact modifier (0, 3%, 6% and 9%) by a counter-rotating twin-screw extruder to manufacture the wood flour- recycled polypropy...